We try to delete the interface, but it lot of tests it won't be there
unless we failed to move it to the container. Let's just clarify that in
a comment and redirect the error output to /dev/null, as it seems an
error otherwise while it is completely normal.
Signed-off-by: Rodrigo Campos <rodrigo@amutable.com>
(cherry picked from commit bb9d1ccaba)
The cleaning is condition on this variable being set. So let's unset it
after we clean the resources.
Signed-off-by: Rodrigo Campos <rodrigo@amutable.com>
(cherry picked from commit e79bff701a)
We are creating the interface for every test, but there is only one
using it. Let's just call the function to create the netdev on the test
that uses it.
I guess that was the reason we had the "ip link del ..." in teardown.
Because in a lot of tests we were just creating and deleting the
interface on the host.
While we are there, as suggested by lifubang, let's make the "ip link
add" line specify the mtu and mac addr. This way, the interface is not
created without that info and we race with host daemons (like udev) that
_might_ want to change it.
Signed-off-by: Rodrigo Campos <rodrigo@amutable.com>
(cherry picked from commit b16ed9a0b8)
Once we add a new network device, systemd-udev may execute some rules.
In particular, we see that on Fedora it sets the MAC address (presumably
based on the host name and device name). This setting races with ours
'ip link set address', as a result, "checkpoint and restore with netdevice"
test sometimes fails telling the MAC address is not as expected.
In the future there may be some other udev rules etc., so the overall
solution is to wait until systemd-udev is finished applying the rules,
thus eliminating the race.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit b2ada85ed3)
The idea of commit d1fca8e was right (report errors for non-existent
root, unless using the default root dir) but the logic was inverted.
Fix the logic.
Test case for default root requires non-existent /root/runc, which is
not always possible.
[v1.5 backport: use GlobalIsSet]
Reported-by: RedMakeUp <girafeeblue@gmail.com>
Co-authored-by: RedMakeUp <girafeeblue@gmail.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 98c442a0e6)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As runc binary grows in size over time (new features, more
dependencies) some tests start to flake because of low memory limits.
One such test is "runc run (cgroup v2 resources.unified override)";
it obviously fails because of 1M memory limit:
> runc run failed: unable to start container process: container init was OOM-killed (memory limit too low?)
Increase the limits 4x. Do the same for the "unified only" test.
Fixes issue 5264.
Reported-by: Kevin Berry <kpberry11@gmail.com>
Reported-by: Ricardo Branco <rbranco@suse.de>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 3fabb4d070)
Signed-off-by: lifubang <lifubang@acmcoder.com>
Co-authored-by: Claude <noreply@anthropic.com>
Apparently, lima's experimental/fedora-rawhide image does not include
which rpm, and we don't really want to bother installing it.
Replace "which" with "command -v". Looks like this was the only place;
we already use "command -v" everywhere else.
This should fix lima (experimental/fedora-rawhide) CI.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 5e78f4a66d)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When RUNC_USE_SYSTEMD is set, tests/rootless.sh is using
ssh -tt rootless@localhost
to run tests as rootless user. In this case, local environment is not
passed to the user's ssh session (unless explicitly specified), and so
the tests do not get ROOTLESS_FEATURES.
As a result, idmap-related tests are skipped when running as rootless
using systemd cgroup driver:
integration test (systemd driver)
...
[02] run rootless tests ... (idmap)
...
ok 286 runc run detached ({u,g}id != 0) # skip test requires rootless_idmap
...
Fix this by creating a list of environment variables needed by the
tests, and adding those to ssh command line (in case of ssh) or
exporting (in case of sudo) so both cases work similarly.
Also, modify disable_idmap to unset variables set in enable_idmap so
they are not exported at all if idmap is not in features.
Fixes: bf15cc99 ("cgroup v2: support rootless systemd")
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 3e0829d195)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Those tests were added by commit 8d180e96 ("Add support for Linux
Network Devices"), apparently by copy-pasting the test cases which
call simple_cr (all four of them).
While different simple_cr tests make sense as they cover different
code paths in runc and/or check for various regression, the same
variations with netdevice do not make sense, as having a net device
is orthogonal to e.g. bind mount, --debug, or cgroupns.
Remove those.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 2cd4782b70)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
These helpers all make more sense as a self-contained package and moving
them has the added benefit of removing an unneeded libpathrs dependency
(from libcontainer/utils's import of pathrs-lite) from several test
binaries.
Signed-off-by: Aleksa Sarai <aleksa@amutable.com>
(cherry picked from commit ca509e76ff)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since switching to Go 1.25 in go.mod, the "detect fd leaks" test fails
like this:
> not ok 57 runc create[detect fd leak as comprehensively as possible]
> # (in test file tests/integration/create.bats, line 76)
> # `[ "$violation_found" -eq 0 ]' failed
> ...
> # Violation: FD 9 -> '/system.slice/runc-test_busybox.scope/cpu.cfs_quota_us'
> # Violation: FD 10 -> '/system.slice/runc-test_busybox.scope/cpu.cfs_period_us'
> ...
This happens because Go 1.25 adds a feature to dynamically set GOMAXPROC
based on current CPU quota values. This feature can be disabled by setting
GODEBUG=containermaxprocs=0,updatemaxprocs=0
but it is harmless to keep it (except for the above test failure).
Add an exception to the test case.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit f9a9a36fa8)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This adds support for WaitKillableRecv seccomp flag
(also known as SCMP_FLTATR_CTL_WAITKILL in libseccomp and
as SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV in the kernel).
This requires:
- libseccomp >= 2.6.0
- libseccomp-golang >= 0.11.0
- linux kernel >= 5.19
Note that this flag does not make sense without NEW_LISTENER, and
the kernel returns EINVAL when SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV
is set but SECCOMP_FILTER_FLAG_NEW_LISTENER is not set.
For runc this means that .linux.seccomp.listenerPath should also be set,
and some of the seccomp rules should have SCMP_ACT_NOTIFY action. This
is why the flag is tested separately in seccomp-notify.bats.
At the moment the only adequate CI environment for this functionality is
Fedora 43. On all other platforms (including CentOS 10 and Ubuntu 24.04)
it is skipped similar to this:
> ok 251 runc run [seccomp] (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) # skip requires libseccomp >= 2.6.0 and API level >= 7 (current version: 2.5.6, API level: 6)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 0079bee17f)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
SCMP_ACT_KILL terminates the process with a fatal signal, which may
produce a core dump depending on the host configuration.
While this is harmless on ephemeral CI instances, it can leave unwanted
core files on developer or customer systems. It also interferes with
test environments that detect unexpected core dumps.
Signed-off-by: Ricardo Branco <rbranco@suse.de>
When parsing mount options into recAttrSet and recAttrClr,
the code sets attr_clr to individual atime flags (e.g.
MOUNT_ATTR_NOATIME or MOUNT_ATTR_STRICTATIME) when clearing
atime attributes. However, this violates the kernel's
requirement documented in mount_setattr(2)[1]:
> Note that, since the access-time values are an enumeration
> rather than bit values, a caller wanting to transition to a
> different access-time setting cannot simply specify the
> access-time setting in attr_set, but must also include
> MOUNT_ATTR__ATIME in the attr_clr field. The kernel will
> verify that MOUNT_ATTR__ATIME isn't partially set in
> attr_clr (i.e., either all bits in the MOUNT_ATTR__ATIME
> bit field are either set or clear), and that attr_set
> doesn't have any access-time bits set if MOUNT_ATTR__ATIME
> isn't set in attr_clr.
Passing only a single atime flag (e.g. MOUNT_ATTR_RELATIME) in
attr_clr causes mount_setattr() to fail with EINVAL.
This change ensures that whenever an atime mode is updated,
attr_clr includes MOUNT_ATTR__ATIME to properly reset the
entire access-time attribute field before applying the new mode.
[1] https://man7.org/linux/man-pages/man2/mount_setattr.2.html
Signed-off-by: lifubang <lifubang@acmcoder.com>
We intentionally broke this in commit d40b3439a9 ("rootfs: switch to
fd-based handling of mountpoint targets") under the assumption that most
users do not need this feature. Sadly it turns out they do, and so
commit 3f925525b4 ("rootfs: re-allow dangling symlinks in mount
targets") added a hotfix to re-add this functionality.
This patch adds some much-needed tests for this behaviour, since it
seems we are going to need to keep this for compatibility reasons (at
least until runc v2...).
Co-developed-by: lifubang <lifubang@acmcoder.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
On some systems (e.g., AlmaLinux 8), systemd automatically removes cgroup paths
when they become empty (i.e., contain no processes). To prevent this, we spawn
a dummy process to pin the cgroup in place.
Fix: https://github.com/opencontainers/runc/issues/5003
Signed-off-by: lifubang <lifubang@acmcoder.com>
This was always the intended behaviour but commit 72fbb34f50 ("rootfs:
switch to fd-based handling of mountpoint targets") regressed it when
adding a mechanism to create a file handle to the target if it didn't
already exist (causing the later stat to always succeed).
A lot of people depend on this functionality, so add some tests to make
sure we don't break it in the future.
Fixes: 72fbb34f50 ("rootfs: switch to fd-based handling of mountpoint targets")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
This is mostly to improve readability. While at it, make the script more
robust by adding -e option to shell. The exception is echo $pid which is
opportunistic and may fail depending on the order of pids in the file.
Also, remove the empty comment and a shellcheck annotation.
Fixes: c91fe9ae
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The "runc delete --force [paused container]" test case does not check
runc pause exit code, and if added, the test fails in rootless tests,
because:
- not all rootless tests have access to cgroups;
- rootless containers doesn't have default cgroups path.
To fix, add:
- setup for rootless case;
- require cgroups_freezer;
- runc pause exit code check.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In our bats tests, runc itself is a wrapper which calls bats run helper,
so using "run runc" is wrong as it results in calling run helper twice.
Fixes: 8d180e965
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commands that are not run via "run" helper (cat, mkdir, __runc)
do not set $status, so it makes no sense to check it.
Fixes: 94505a04, ed548376
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a bit opinionated, but some comments in integration tests do not
really help to understand the nature of the tests being performed by
stating something very obvious, like
# run busybox detached
runc run -d busybox
To make things worse, these not-so-helpful messages are being
copy/pasted over and over, and that is the main reason to remove them.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Remove the devicemapper driver mentions, and is it no longer
supported by docker (or podman).
2. Remove the test example -- we have plenty of real ones.
3. Add a link to (well written and extensive) bats documentation.
4. Fix capitalization in a sentence.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This removes `mips64le` (no longer supported by the image / upstream in Debian Trixie+) and adds `riscv64`.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
Rodrigo Campos