A recent commit a35cad3b22 added warnings about systemd being too
old. While those warnings are valid, they break some existing tests,
and also don't add much value to a user (IOW no one is going to upgrade
systemd because runc says it's old).
Demote those to warnings.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Add a check to unifiedResToSystemdProps that systemd is recent enough
to support AllowedCPUs/AllowedMemoryNodes unit properties, and skip
setting the property if it is not supported.
Note that this is not an error as the setting is still applied to
the underlying cgroupfs -- it's just systemd unit property that is
being skipped.
2. In all the places we skip an unsupported property, warn about it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Support for systemd properties AllowedCPUs and AllowedMemoryNodes
was added by commit 13afa58d0e, but only for unified resources
of systemd v2 driver.
This adds support for Cpu.Cpus and Cpu.Mems resources to
both systemd v1 and v2 cgroup drivers.
An integration test is added to check that the settings work.
[v2: check for systemd version]
[v3: same in the test]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As the caller of this function just logs the error, it does not make
sense to pass it. Instead, log it (once) and return -1.
This is a preparation for the second user.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Move the Device-related types to libcontainer/devices, so that
the package can be used in isolation. Aliases have been created
in libcontainer/configs for backward compatibility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* cpuset.cpus -> AllowedCPUs
* cpuset.mems -> AllowedMemoryNodes
No test for cgroup v2 resources.unified override, as this requires a
separate test case, and all the unified resources are handled uniformly
so there's little sense to test all parameters.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case systemd is used as cgroups manager, and a user sets some
resources using unified resource map (as per [1]), systemd is not
aware of any parameters, so there will be a discrepancy between
the cgroupfs state and systemd unit state.
Let's try to fix that by converting known unified resources to systemd
properties.
Currently, this is only implemented for pids.max as a POC.
Some other parameters (that might or might not have systemd unit
property equivalents) are:
$ ls -l | grep w-
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.freeze
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.max.depth
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.max.descendants
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.procs
-rw-r--r--. 1 root root 0 Oct 21 09:43 cgroup.subtree_control
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.threads
-rw-r--r--. 1 root root 0 Oct 10 13:57 cgroup.type
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpu.max
-rw-r--r--. 1 root root 0 Oct 10 13:57 cpu.pressure
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpuset.cpus
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpuset.cpus.partition
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpuset.mems
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpu.weight
-rw-r--r--. 1 root root 0 Oct 22 10:30 cpu.weight.nice
-rw-r--r--. 1 root root 0 Oct 22 10:30 hugetlb.1GB.max
-rw-r--r--. 1 root root 0 Oct 22 10:30 hugetlb.1GB.rsvd.max
-rw-r--r--. 1 root root 0 Oct 22 10:30 hugetlb.2MB.max
-rw-r--r--. 1 root root 0 Oct 22 10:30 hugetlb.2MB.rsvd.max
-rw-r--r--. 1 root root 0 Oct 22 10:30 io.bfq.weight
-rw-r--r--. 1 root root 0 Oct 22 10:30 io.latency
-rw-r--r--. 1 root root 0 Oct 22 10:30 io.max
-rw-r--r--. 1 root root 0 Oct 10 13:57 io.pressure
-rw-r--r--. 1 root root 0 Oct 22 10:30 io.weight
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.high
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.low
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.max
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.min
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.oom.group
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.pressure
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.swap.high
-rw-r--r--. 1 root root 0 Oct 10 13:57 memory.swap.max
Surely, it is a manual conversion for every such case...
[1] https://github.com/opencontainers/runtime-spec/pull/1040
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 27d3dd3df3 ("don't fail when subsystem not mounted") added
ignoring "not found" error to enableKmem, and as a result the function
now tries to call Mkdir with an empty path, which results in a weird
error message. For example, this is a failure from a
libcontainer/integration test:
> === RUN TestRunWithKernelMemorySystemd
> exec_test.go:704: runContainer failed with kernel memory limit: container_linux.go:370: starting container process caused: process_linux.go:327: applying cgroup configuration for process caused: mkdir : no such file or directory
I am not entirely sure if it is a good idea to silently ignore set
limits, but at least let's fix the error handling.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit a1d5398afa ("Respect container's cgroup path") added a
cgroupPath argument to FindCgroupMountpoint to make runc/libcontainer
work in a custom multitenant environment with multiple cgroup mount
points.
It also added passing c.Path as an argument to FindCgroupMountpoint
for systemd (v1) controller. This is wrong, because
1. systemd controller do not use c.Path at all (and c.Path is never set
by specconv) -- instead, it uses Name and Parent.
2. c.Path, if set, is not absolute -- it is relative to /sys/fs/cgroup
-- but it is used as an absolute path here.
Since c.Path is never set, the change did not result in any breakage, so
this code sit quietly for some time and the issue might not have been
discovered -- until we started running libcontainer/integration tests
in a CentOS 7 VM, which resulted in a following weird error:
> FAIL: TestPidsSystemd: utils_test.go:55: exec_test.go:630: unexpected error: container_linux.go:353: starting container process caused: process_linux.go:326: applying cgroup configuration for process caused: mountpoint for devices not found
The error was "fixed" in commit f57bb2fe3d by changing the tests'
cgroups Path to be "/sys/fs/cgroup/". This actually resulted in
creation of cgroup directories like /sys/fs/cgroup/memory/sys/fs/cgroup,
/sys/fs/cgroup/devices/sys/fs/cgroup and so on.
The proper fix to the test case is implemented in the previous commit,
which sets c.Name and c.Parent.
This commit just removes the invalid use of c.Path, and tells the whole
story.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case it takes more than 1 second for systemd to create a unit,
startUnit() times out with a warning and then runc proceeds
(to create cgroups using fs manager and so on).
Now runc and systemd are racing, and multiple scenarios are possible.
In one such scenario, by the time runc calls systemd manager's Apply()
the unit is not yet created, the dbusConnection.SetUnitProperties()
call fails with "unit xxx.scope not found", and the whole container
start also fails.
To eliminate the race, we need to return an error in case the timeout is
hit.
To reduce the chance to fail, increase the timeout from 1 to 30 seconds,
to not error out too early on a busy/slow system (and times like 3-5
seconds are not unrealistic).
While at it, as the timeout is quite long now, make sure to not leave
a stray timer.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In all these cases, getSubsystemPath() was already called, and its
result stored in m.paths map. It makes no sense to not reuse it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
We call joinCgroups() from Apply, and in there we iterate through the
list of subsystems, calling getSubsystemPath() for each. This is
expensive, since every getSubsystemPath() involves parsing mountinfo.
At the end of Apply(), we iterate through the list of subsystems to fill
the m.paths, again calling getSubsystemPath() for every subsystem.
As a result, we parse mountinfo about 20 times here.
Let's find the paths first and reuse m.paths in joinCgroups().
While at it, since join() is just two calls now, inline it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When paths are set, we only need to place the PID into proper
cgroups, and we do know all the paths already.
Both fs/d.path() and systemd/v1/getSubsystemPath() parse
/proc/self/mountinfo, and the only reason they are used
here is to check whether the subsystem is available.
Use a much simpler/faster check instead.
Frankly, I am not sure why the check is needed at all. Maybe it should
be dropped.
Also, for fs driver, since d is no longer used in this code path,
move its initialization to after it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of iterating over m.paths, iterate over subsystems and look up
the path for each. This is faster since a map lookup is faster than
iterating over the names in Get. A quick benchmark shows that the new
way is 2.5x faster than the old one.
Note though that this is not done to make things faster, as savings are
negligible, but to make things simpler by removing some code.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
RemovePaths() deletes elements from the paths map for paths that has
been successfully removed.
Although, it does not empty the map itself (which is needed that AFAIK
Go garbage collector does not shrink the map), but all its callers do.
Move this operation from callers to RemovePaths.
No functional change, except the old map should be garbage collected now.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
some hierarchies were created directly by .Apply() on top of systemd
managed cgroups. systemd doesn't manage these and as a result we leak
these cgroups.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Iterating over the list of subsystems and comparing their names to get an
instance of fs.cgroupFreezer is useless and a waste of time, since it is
a shallow type (i.e. does not have any data/state) and we can create an
instance in place.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The kubelet uses libct/cgroups code to set up cgroups. It creates a
parent cgroup (kubepods) to put the containers into.
The problem (for cgroupv2 that uses eBPF for device configuration) is
the hard requirement to have devices cgroup configured results in
leaking an eBPF program upon every kubelet restart. program. If kubelet
is restarted 64+ times, the cgroup can't be configured anymore.
Work around this by adding a SkipDevices flag to Resources.
A check was added so that if SkipDevices is set, such a "container"
can't be started (to make sure it is only used for non-containers).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
there have been cases observed where instead of `v$VER.0-$OS` the systemdVersion returned is just `$VER`, or `$VER-1`.
handle these cases
Signed-off-by: Peter Hunt <pehunt@redhat.com>
For some reason, runc systemd drivers (both v1 and v2) never set
systemd unit property named `CPUQuotaPeriod` (known as
`CPUQuotaPeriodUSec` on dbus and in `systemctl show` output).
Set it, and add a check to all the integration tests. The check is less
than trivial because, when not set, the value is shown as "infinity" but
when set to the same (default) value, shown as "100ms", so in case we
expect 100ms (period = 100000 us), we have to _also_ check for
"infinity".
[v2: add systemd version checks since CPUQuotaPeriod requires v242+]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fixes a few cases of accessing m.paths map directly without holding
the mutex lock.
Fixes: 9087f2e82
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
systemd drivers ignore --cpu-quota during update if the CPU
period was not set earlier.
Fixed by adding the default for the period.
The test will be added by the following commit.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The code that adds CpuQuotaPerSecUSec is the same in v1 and v2
systemd cgroup driver. Move it to common.
No functional change.
Note that the comment telling that we always set this property
contradicts with the current code, and therefore it is removed.
[v2: drop cgroupv1-specific comment]
[v3: drop returning error as it's not used]
[v4: remove an obsoleted comment]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Use r instead of c.Resources for readability. No functional change.
This commit has been brought to you by '<,'>s/c\.Resources\./r./g
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Mrunal Patel