Errors from unix.* are always bare and thus can be used directly.
Add //nolint:errorlint annotation to ignore errors such as these:
libcontainer/system/xattrs_linux.go:18:7: comparing with == will fail on wrapped errors. Use errors.Is to check for a specific error (errorlint)
case errno == unix.ERANGE:
^
libcontainer/container_linux.go:1259:9: comparing with != will fail on wrapped errors. Use errors.Is to check for a specific error (errorlint)
if e != unix.EINVAL {
^
libcontainer/rootfs_linux.go:919:7: comparing with != will fail on wrapped errors. Use errors.Is to check for a specific error (errorlint)
if err != unix.EINVAL && err != unix.EPERM {
^
libcontainer/rootfs_linux.go:1002:4: switch on an error will fail on wrapped errors. Use errors.Is to check for specific errors (errorlint)
switch err {
^
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Do this for all errors except one from unix.*.
This fixes a bunch of errorlint warnings, like these
libcontainer/generic_error.go:25:15: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
if le, ok := err.(Error); ok {
^
libcontainer/factory_linux_test.go:145:14: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
lerr, ok := err.(Error)
^
libcontainer/state_linux_test.go:28:11: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
_, ok := err.(*stateTransitionError)
^
libcontainer/seccomp/patchbpf/enosys_linux.go:88:4: switch on an error will fail on wrapped errors. Use errors.Is to check for specific errors (errorlint)
switch err {
^
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This one is tough as errorlint insists on using errors.Is, and the
latter is known to not work for Go 1.13 which we still support.
So, add a nolint annotation to suppress the warning, and a TODO to
address it later.
For intelrdt, we can do the same, but it is easier to reuse the very
same function from fscommon (note we can't use fscommon for other stuff
as it expects cgroupfs).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This should result in no change when the error is printed, but make the
errors returned unwrappable, meaning errors.As and errors.Is will work.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This builds on top of recently introduced fscommon.ParseError.
Errors returned from parsers (mostly ones used by GetStats()) are all
different, and many are incomplete. For example, in many cases errors
from strconv.ParseUint are returned as is, meaning there is no context
telling which file we were reading. Similarly, errors from
fscommon.ParseKeyValue should be wrapped to add more context.
Same is true for scanner.Err().
OTOH, errors from fscommon.GetCgroup* do have enough context and there
is no need to wrap them.
Fix all the above.
While at it, add missing scanner.Err() checks.
[v2: use parseError, not ParseError]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This builds on top of recently introduced fscommon.ParseError.
Errors returned from parsers (mostly ones used by GetStats()) are all
different, and many are incomplete. For example, in many cases errors
from strconv.ParseUint are returned as is, meaning there is no context
telling which file we were reading. Similarly, errors from
fscommon.ParseKeyValue should be wrapped to add more context.
Same is true for scanner.Err().
One special case that repeats a few times is "malformed line: xxx".
Add and use a helper for that to simplify things.
OTOH, errors from fscommon.GetCgroup* do have enough context and there
is no need to wrap them.
Fix all the above.
While at it, add a missing scanner.Err() check.
[v2: use parseError not ParseError]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Introduce ParseError type as a way to unify error messages related to
file parsing. Use it from GetCgroup* functions.
2. Do not discard the error from strconv.Parse{Int,Uint} -- it contains
the value being parsed, and the details about the error.
2. As the error above already contains the value, drop it from format.
[v2: use path.Join in Error]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Do not wrap errors returned from fscommon.GetCgroupParamUint -- those
errors already have enough context.
2. Instead of parsing "max" ourselves, use GetCgroupParamUint which does
it, and then convert MaxUint64 to 0 (we do it historically since
commit 087b953dc5, and while using MaxUint64 as is seems fine,
there may be some existing users who rely on the old behavior).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The error from fscommon.GetCgroup* already contains the file name and so
on, so there's no need to wrap it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The error returned from strconv.ParseUint is already pretty descriptive,
something like:
strconv.ParseUint: parsing "000d": invalid syntax
So, there is no need to add more context to it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Using fmt.Errorf for errors that do not have %-style formatting
directives is an overkill. Switch to errors.New.
Found by
git grep fmt.Errorf | grep -v ^vendor | grep -v '%'
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Per-device weight is supported since kernel v5.4 (kernel commit
795fe54c2a8), so let's set those if supplied.
[v2: implement a more relaxed check in bfqDeviceWeightSupported]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For per-device weight, you can set weight and/or leaf weight.
The problem is, with the recent fix to use BFQ on cgroup v1,
if per-device weights are set, the code tries to set device
weight to blkio.bfq.weight, and the leaf weight to
blkio.leaf_weight_device. The latter file does not exist on
kernels v5.0, meaning one can not set any per-device weights
at all.
The fix is to only set weights if they are non-zero (i.e. set).
The test case will come in a following commit.
Fixes: 6339d8a0dd
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a better place as cgroups itself is using these.
Should help with moving more stuff common in between fs and fs2 to
fscommon.
Looks big, but this is just moving the code around:
fscommon/{fscommon,open}.go -> cgroups/file.go
fscommon/fscommon_test.go -> cgroups/file_test.go
and fixes for TestMode moved to a different package.
There's no functional change.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The `errors.Is(err, unix.EINVAL)` check in `haveBpfProgReplace()` was
broken because the `cilium/ebpf` library did not "wrap" errors.
https://github.com/cilium/ebpf/blob/v0.6.0/link/program.go#L72
So the eBPF support of runc was broken for kernel prior to 5.6.
This commit bumps up cilium/ebpf to contain cilium/ebpf PR 320.
Fix opencontainers/runc issue 3008
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
- Update the blkio cgroup to support the BFQ I/O Scheduler, that has
replaced CFQ in the Linux kernel.
- BFQ is controlled through blkio.bfq.weight[_device] instead of
CFQ's blkio.weight[_device] in cgroups v1.
- BFQ does not support blkio.leaf_weight[_device], so that behavior
remains untouched.
- Do not change behavior on legacy CFQ systems.
- Enable using blkio weights on BFQ systems.
Signed-off-by: Antti Kervinen <antti.kervinen@intel.com>
1. The meaning of SkipDevices is what it is -- do not set any
device-related options.
2. Reverts the part of commit 108ee85b82 which skipped the freeze
when the SkipDevices is set. Apparently, the freeze is needed on
update even if no Device* properties are being set.
3. Add "runc update" to "runc run [device cgroup deny]" test.
Fixes: 752e7a8249
Fixes: 108ee85b82
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It seems that we are triggering the mutli-attach fallback in the fedora
CI, but we don't have enough debugging information to really know what's
going on, so add some. Unfortunately the amount of information we have
available with eBPF programs in general is fairly limited (we can't get
their bytecode for instance).
We also demote the "more than one filter" warning to an info message
because it happens very often under the systemd cgroup driver (likely
when systemd configures the cgroup it isn't deleting our old program, so
when our apply code runs after the systemd one there are two running
programs).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
It turns out that the cilium eBPF library doesn't degrade gracefully if
BPF_F_REPLACE is not supported, so we need to work around it by treating
that case as we treat the more-than-one program case.
It also turns out that we weren't passing BPF_F_REPLACE explicitly, but
this is required by the cilium library (causing EINVALs).
Fixes: d0f2c25f52 ("cgroup2: devices: replace all existing filters when attaching")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Noticed that the check of trying to use both rootful and rootless
in NewDbusConnManager never worked, as we never set dbusInited to true.
Do that. While at it, protect this with the mutex (against the
case of two goroutines simultaneously calling NewDbusConnManager).
This is a rare call, so taking read-only then read-write mutex does not
make sense.
Fixes: c7f847ed3a
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fixes isDbusError function, introduced by commit bacfc2c. Due to a
type error it was not working at all.
This also fixes the whole "retry on dbus disconnect" logic.
This also fixes a regression in startUnit (and cgroupManager.Apply()),
which should never return "unit already exists" error but it did.
Fixes: bacfc2c
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
These functions are called from multiple places,
and if t.Helper() is not used, the context is not clear.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
libcontainer/cgroups/devices/devices_emulator.go:261:9: `if` block ends with a `return` statement, so drop this `else` and outdent its block (golint)
} else {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
gofumpt (mvdan.cc/gofumpt) is a fork of gofmt with stricter rules.
Brought to you by
git ls-files \*.go | grep -v ^vendor/ | xargs gofumpt -s -w
Looking at the diff, all these changes make sense.
Also, replace gofmt with gofumpt in golangci.yml.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
strconv.ParseUint(..., 0) is not really safe, because on 32-bit
architectures it will trigger runtime errors when trying to parse large
numbers (which in the case of the cgroupv2 io controller, is almost
certainly going to happen).
Fixes: 1932917b71 ("libcontainer: add initial support for cgroups v2")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Kubelet and cAdvisor depend on the metrics having the same values as in
cgroupv1, but we didn't correctly map the number of read and write IOs
to the correct cgroupv1 stats table (blkio.io_serviced).
In addition, don't leak any extra stats in our output -- if users need
that information we can always add a new field for it.
Reported-by: Yashpal Choudhary <yashpal.c1995@gmail.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
The idea is to mimic what kubelet is doing, with minimum amount of code.
First, create a slice with SkipDevices=true. It should have access to
all devices.
Next, create a scope within the above slice, allowing access to /dev/full
only.
Check that within that scope we can only access /dev/full and not other
devices (such as /dev/null).
Repeat the test with SkipDevices=false, make sure we can not access any
devices (as they are disallowed by a parent cgroup). This is done only
to assess the test correctness.
NOTE that cgroup v1 and v2 behave differently for SkipDevices=false
case, and thus the check is different. Cgroup v1 returns EPERM on
writing to devices.allow, so cgroup manager's Set() fails, and we check
for a particular error from m.Set(). Cgroup v2 allows to create a child
cgroup, but denies access to any device (despite access being enabled)
-- so we check the error from the shell script running in that cgroup.
Again, this is only about SkipDevices=false case.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Most of these were false positives or cases where we want to ignore the
lint, but the change to the BPF generation is actually useful.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Commit 108ee85b82 adds SkipDevices flag, which is used by kubernetes
to create cgroups for pods.
Unfortunately the above commit falls short, and systemd DevicePolicy and
DeviceAllow properties are still set, which requires kubernetes to set
"allow everything" rule.
This commit fixes this: if SkipDevices flag is set, we return
Device* properties to allow all devices.
Fixes: 108ee85b82
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Kir Kolyshkin