Remove joinCgroupsV2() function, as its name and second parameter
are misleading. Use createCgroupsv2Path() directly, do not call
getv2Path() twice.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Function getSubsystemPath(), while works for v2 unified case, is
suboptimal, as it does a few unnecessary calls.
Add a simplified version of getSubsystemPath(), called getv2Path(),
and use it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This code is a copy-paste from cgroupv1 systemd code. Its aim
is to check whether a subsystem is available, and skip those
that are not.
In case v2 unified hierarchy is used, getSubsystemPath never
returns "not found" error, so calling it is useless.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
To the best of my knowledge, it has been decided to drop the kernel
memory controller from the cgroupv2 hierarchy, so "kernel memory limits"
do not exist if we're using v2 unified.
So, we need to ignore kernel memory setting. This was already done in
non-systemd case (see commit 88e8350de), let's do the same for systemd.
This fixes the following error:
> container_linux.go:349: starting container process caused "process_linux.go:306: applying cgroup configuration for process caused \"open /sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/tasks: no such file or directory\""
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Return earlier if there is an error.
2. Do not use filepath.Split on every entry, use info.Name() instead.
3. Make readProcsFile() accept file name as an argument, to avoid
unnecessary file name and directory splitting and merging.
4. Skip on info.IsDir() -- this avoids an error when cgroup name is
set to "cgroup.procs".
This is still not very good since filepath.Walk() performs an unnecessary
stat(2) on every entry, but better than before.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
fmt.Sprintf is slow and is not needed here, string concatenation would
be sufficient. It is also redundant to convert []byte from string and
back, since `bytes` package now provides the same functions as `strings`.
Use Fields() instead of TrimSpace() and Split(), mainly for readability
(note Fields() is somewhat slower than Split() but here it doesn't
matter much).
Use Join() to prepend the plus signs.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* TestConvertCPUSharesToCgroupV2Value(0) was returning 70369281052672, while the correct value is 0
* ConvertBlkIOToCgroupV2Value(0) was returning 32, while the correct value is 0
* ConvertBlkIOToCgroupV2Value(1000) was returning 4, while the correct value is 10000
Fix#2244
Follow-up to #2212#2213
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
linuxContainer.Signal() can race with another call to say Destroy()
which clears the container's initProcess. This can cause a nil pointer
dereference in Signal().
This patch will synchronize Signal() and Destroy() by grabbing the
container's mutex as part of the Signal() call.
Signed-off-by: Pradyumna Agrawal <pradyumnaa@vmware.com>
Some systemd properties are documented as having "Sec" suffix
(e.g. "TimeoutStopSec") but are expected to have "USec" suffix
when passed over dbus, so let's provide appropriate conversion
to improve compatibility.
This means, one can specify TimeoutStopSec with a numeric argument,
in seconds, and it will be properly converted to TimeoutStopUsec
with the argument in microseconds. As a side bonus, even float
values are converted, so e.g. TimeoutStopSec=1.5 is possible.
This turned out a bit more tricky to implement when I was
originally expected, since there are a handful of numeric
types in dbus and each one requires explicit conversion.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case systemd is used to set cgroups for the container,
it creates a scope unit dedicated to it (usually named
`runc-$ID.scope`).
This patch adds an ability to set arbitrary systemd properties
for the systemd unit via runtime spec annotations.
Initially this was developed as an ability to specify the
`TimeoutStopUSec` property, but later generalized to work with
arbitrary ones.
Example usage: add the following to runtime spec (config.json):
```
"annotations": {
"org.systemd.property.TimeoutStopUSec": "uint64 123456789",
"org.systemd.property.CollectMode":"'inactive-or-failed'"
},
```
and start the container (e.g. `runc --systemd-cgroup run $ID`).
The above will set the following systemd parameters:
* `TimeoutStopSec` to 2 minutes and 3 seconds,
* `CollectMode` to "inactive-or-failed".
The values are in the gvariant format (see [1]). To figure out
which type systemd expects for a particular parameter, see
systemd sources.
In particular, parameters with `USec` suffix require an `uint64`
typed argument, while gvariant assumes int32 for a numeric values,
therefore the explicit type is required.
NOTE that systemd receives the time-typed parameters as *USec
but shows them (in `systemctl show`) as *Sec. For example,
the stop timeout should be set as `TimeoutStopUSec` but
is shown as `TimeoutStopSec`.
[1] https://developer.gnome.org/glib/stable/gvariant-text.html
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Adrian reported that the checkpoint test stated failing:
=== RUN TestCheckpoint
--- FAIL: TestCheckpoint (0.38s)
checkpoint_test.go:297: Did not restore the pipe correctly:
The problem here is when we start exec.Cmd, we don't call its wait
method. This means that we don't wait cmd.goroutines ans so we don't
know when all data will be read from process pipes.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
mount(2) will blindly follow symlinks, which is a problem because it
allows a malicious container to trick runc into mounting /proc to an
entirely different location (and thus within the attacker's control for
a rename-exchange attack).
This is just a hotfix (to "stop the bleeding"), and the more complete
fix would be finish libpathrs and port runc to it (to avoid these types
of attacks entirely, and defend against a variety of other /proc-related
attacks). It can be bypased by someone having "/" be a volume controlled
by another container.
Fixes: CVE-2019-19921
Signed-off-by: Aleksa Sarai <asarai@suse.de>
A new method was added to the cgroup interface when #2177 was merged.
After #2177 got merged, #2169 was merged without rebase (sorry!) and compilation was failing:
libcontainer/cgroups/fs2/fs2.go:208:22: container.Cgroup undefined (type *configs.Config has no field or method Cgroup)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
`configs.Cgroup` contains the configuration used to create cgroups. This
configuration must be saved to disk, since it's required to restore the
cgroup manager that was used to create the cgroups.
Add method to get cgroup configuration from cgroup Manager to allow API users
save it to disk and restore a cgroup manager later.
fixes#2176
Signed-off-by: Julio Montes <julio.montes@intel.com>
A `config.Cgroups` object is required to manipulate cgroups v1 and v2 using
libcontainer.
Export `createCgroupConfig` to allow API users to create `config.Cgroups`
objects using directly libcontainer API.
Signed-off-by: Julio Montes <julio.montes@intel.com>
Kir Kolyshkin