Currently bind mounts of filesystems with nodev, nosuid, noexec,
noatime, relatime, strictatime, nodiratime options set fail in rootless
mode if the same options are not set for the bind mount.
For ro filesystems this was resolved by #2570 by remounting again
with ro set.
Follow the same approach for nodev, nosuid, noexec, noatime, relatime,
strictatime, nodiratime but allow to revert back to the old behaviour
via the new `--no-mount-fallback` command line option.
Add a testcase to verify that bind mounts of filesystems with nodev,
nosuid, noexec, noatime options set work in rootless mode.
Add a testcase that mounts a nodev, nosuid, noexec, noatime filesystem
with a ro flag.
Add two further testcases that ensure that the above testcases would
fail if the `--no-mount-fallback` command line option is set.
* contrib/completions/bash/runc:
Add `--no-mount-fallback` command line option for bash completion.
* create.go:
Add `--no-mount-fallback` command line option.
* restore.go:
Add `--no-mount-fallback` command line option.
* run.go:
Add `--no-mount-fallback` command line option.
* libcontainer/configs/config.go:
Add `NoMountFallback` field to the `Config` struct to store
the command line option value.
* libcontainer/specconv/spec_linux.go:
Add `NoMountFallback` field to the `CreateOpts` struct to store
the command line option value and store it in the libcontainer
config.
* utils_linux.go:
Store the command line option value in the `CreateOpts` struct.
* libcontainer/rootfs_linux.go:
In case that `--no-mount-fallback` is not set try to remount the
bind filesystem again with the options nodev, nosuid, noexec,
noatime, relatime, strictatime or nodiratime if they are set on
the source filesystem.
* tests/integration/mounts_sshfs.bats:
Add testcases and rework sshfs setup to allow specifying
different mount options depending on the test case.
Signed-off-by: Ruediger Pluem <ruediger.pluem@vodafone.com>
Two new seccomp actions have been added to the libseccomp-golang
dependency, which can be now supported by runc, too.
ActKillThread kills the thread that violated the rule. It is the same as
ActKill. All other threads from the same thread group will continue to
execute.
ActKillProcess kills the process that violated the rule. All threads in
the thread group are also terminated. This action is only usable when
libseccomp API level 3 or higher is supported.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
This commit implements support for the SCMP_ACT_NOTIFY action. It
requires libseccomp-2.5.0 to work but runc still works with older
libseccomp if the seccomp policy does not use the SCMP_ACT_NOTIFY
action.
A new synchronization step between runc[INIT] and runc run is introduced
to pass the seccomp fd. runc run fetches the seccomp fd with pidfd_get
from the runc[INIT] process and sends it to the seccomp agent using
SCM_RIGHTS.
As suggested by @kolyshkin, we also make writeSync() a wrapper of
writeSyncWithFd() and wrap the error there. To avoid pointless errors,
we made some existing code paths just return the error instead of
re-wrapping it. If we don't do it, error will look like:
writing syncT <act>: writing syncT: <err>
By adjusting the code path, now they just look like this
writing syncT <act>: <err>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Co-authored-by: Rodrigo Campos <rodrigo@kinvolk.io>
This should result in no change when the error is printed, but make the
errors returned unwrappable, meaning errors.As and errors.Is will work.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
gofumpt (mvdan.cc/gofumpt) is a fork of gofmt with stricter rules.
Brought to you by
git ls-files \*.go | grep -v ^vendor/ | xargs gofumpt -s -w
Looking at the diff, all these changes make sense.
Also, replace gofmt with gofumpt in golangci.yml.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit ccdd75760c introduced the HookName type
for hooks, but only set this type on the Prestart const, but not for the
other hooks.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
As reported by go test -race ./libcontainer/configs:
=== RUN TestCommandHookRunTimeout
==================
WARNING: DATA RACE
Read at 0x00c000202230 by goroutine 23:
os/exec.(*Cmd).Wait()
/usr/lib/golang/src/os/exec/exec.go:502 +0x91
github.com/opencontainers/runc/libcontainer/configs.Command.Run()
/home/kir/go/src/github.com/opencontainers/runc/libcontainer/configs/config.go:390 +0x58c
github.com/opencontainers/runc/libcontainer/configs_test.TestCommandHookRunTimeout()
/home/kir/go/src/github.com/opencontainers/runc/libcontainer/configs/config_test.go:223 +0x3ed
testing.tRunner()
/usr/lib/golang/src/testing/testing.go:1123 +0x202
Previous write at 0x00c000202230 by goroutine 27:
os/exec.(*Cmd).Wait()
/usr/lib/golang/src/os/exec/exec.go:505 +0xb4
github.com/opencontainers/runc/libcontainer/configs.Command.Run.func1()
/home/kir/go/src/github.com/opencontainers/runc/libcontainer/configs/config.go:373 +0x55
Goroutine 23 (running) created at:
testing.(*T).Run()
/usr/lib/golang/src/testing/testing.go:1168 +0x5bb
testing.runTests.func1()
/usr/lib/golang/src/testing/testing.go:1439 +0xa6
testing.tRunner()
/usr/lib/golang/src/testing/testing.go:1123 +0x202
testing.runTests()
/usr/lib/golang/src/testing/testing.go:1437 +0x612
testing.(*M).Run()
/usr/lib/golang/src/testing/testing.go:1345 +0x3b3
main.main()
_testmain.go:69 +0x236
Goroutine 27 (running) created at:
github.com/opencontainers/runc/libcontainer/configs.Command.Run()
/home/kir/go/src/github.com/opencontainers/runc/libcontainer/configs/config.go:372 +0x415
github.com/opencontainers/runc/libcontainer/configs_test.TestCommandHookRunTimeout()
/home/kir/go/src/github.com/opencontainers/runc/libcontainer/configs/config_test.go:223 +0x3ed
testing.tRunner()
/usr/lib/golang/src/testing/testing.go:1123 +0x202
==================
testing.go:1038: race detected during execution of test
--- FAIL: TestCommandHookRunTimeout (0.10s)
Apparently, the issue is we call two Wait()s for the same command
which can race internally.
Fix is easy -- since we already have a waiting goroutine,
wait for it to return instead of calling a second Wait().
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Move the Device-related types to libcontainer/devices, so that
the package can be used in isolation. Aliases have been created
in libcontainer/configs for backward compatibility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Finish off the work started in a344b2d6 (sync up `HookState` with OCI
spec `State`, 2016-12-19, #1201).
And drop HookState, since there's no need for a local alias for
specs.State.
Also set c.initProcess in newInitProcess to support OCIState calls
from within initProcess.start(). I think the cyclic references
between linuxContainer and initProcess are unfortunate, but didn't
want to address that here.
I've also left the timing of the Prestart hooks alone, although the
spec calls for them to happen before start (not as part of creation)
[1,2]. Once the timing gets fixed we can drop the
initProcessStartTime hacks which initProcess.start currently needs.
I'm not sure why we trigger the prestart hooks in response to both
procReady and procHooks. But we've had two prestart rounds in
initProcess.start since 2f276498 (Move pre-start hooks after container
mounts, 2016-02-17, #568). I've left that alone too.
I really think we should have len() guards to avoid computing the
state when .Hooks is non-nil but the particular phase we're looking at
is empty. Aleksa, however, is adamantly against them [3] citing a
risk of sloppy copy/pastes causing the hook slice being len-guarded to
diverge from the hook slice being iterated over within the guard. I
think that ort of thing is very lo-risk, because:
* We shouldn't be copy/pasting this, right? DRY for the win :).
* There's only ever a few lines between the guard and the guarded
loop. That makes broken copy/pastes easy to catch in review.
* We should have test coverage for these. Guarding with the wrong
slice is certainly not the only thing you can break with a sloppy
copy/paste.
But I'm not a maintainer ;).
[1]: https://github.com/opencontainers/runtime-spec/blob/v1.0.0/config.md#prestart
[2]: https://github.com/opencontainers/runc/issues/1710
[3]: https://github.com/opencontainers/runc/pull/1741#discussion_r233331570
Signed-off-by: W. Trevor King <wking@tremily.us>
Memory Bandwidth Allocation (MBA) is a resource allocation sub-feature
of Intel Resource Director Technology (RDT) which is supported on some
Intel Xeon platforms. Intel RDT/MBA provides indirect and approximate
throttle over memory bandwidth for the software. A user controls the
resource by indicating the percentage of maximum memory bandwidth.
Hardware details of Intel RDT/MBA can be found in section 17.18 of
Intel Software Developer Manual:
https://software.intel.com/en-us/articles/intel-sdm
In Linux 4.12 kernel and newer, Intel RDT/MBA is enabled by kernel
config CONFIG_INTEL_RDT. If hardware support, CPU flags `rdt_a` and
`mba` will be set in /proc/cpuinfo.
Intel RDT "resource control" filesystem hierarchy:
mount -t resctrl resctrl /sys/fs/resctrl
tree /sys/fs/resctrl
/sys/fs/resctrl/
|-- info
| |-- L3
| | |-- cbm_mask
| | |-- min_cbm_bits
| | |-- num_closids
| |-- MB
| |-- bandwidth_gran
| |-- delay_linear
| |-- min_bandwidth
| |-- num_closids
|-- ...
|-- schemata
|-- tasks
|-- <container_id>
|-- ...
|-- schemata
|-- tasks
For MBA support for `runc`, we will reuse the infrastructure and code
base of Intel RDT/CAT which implemented in #1279. We could also make
use of `tasks` and `schemata` configuration for memory bandwidth
resource constraints.
The file `tasks` has a list of tasks that belongs to this group (e.g.,
<container_id>" group). Tasks can be added to a group by writing the
task ID to the "tasks" file (which will automatically remove them from
the previous group to which they belonged). New tasks created by
fork(2) and clone(2) are added to the same group as their parent.
The file `schemata` has a list of all the resources available to this
group. Each resource (L3 cache, memory bandwidth) has its own line and
format.
Memory bandwidth schema:
It has allocation values for memory bandwidth on each socket, which
contains L3 cache id and memory bandwidth percentage.
Format: "MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;..."
The minimum bandwidth percentage value for each CPU model is predefined
and can be looked up through "info/MB/min_bandwidth". The bandwidth
granularity that is allocated is also dependent on the CPU model and
can be looked up at "info/MB/bandwidth_gran". The available bandwidth
control steps are: min_bw + N * bw_gran. Intermediate values are
rounded to the next control step available on the hardware.
For more information about Intel RDT kernel interface:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
An example for runc:
Consider a two-socket machine with two L3 caches where the minimum
memory bandwidth of 10% with a memory bandwidth granularity of 10%.
Tasks inside the container may use a maximum memory bandwidth of 20%
on socket 0 and 70% on socket 1.
"linux": {
"intelRdt": {
"memBwSchema": "MB:0=20;1=70"
}
}
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This PR decomposes `libcontainer/configs.Config.Rootless bool` into `RootlessEUID bool` and
`RootlessCgroups bool`, so as to make "runc-in-userns" to be more compatible with "rootful" runc.
`RootlessEUID` denotes that runc is being executed as a non-root user (euid != 0) in
the current user namespace. `RootlessEUID` is almost identical to the former `Rootless`
except cgroups stuff.
`RootlessCgroups` denotes that runc is unlikely to have the full access to cgroups.
`RootlessCgroups` is set to false if runc is executed as the root (euid == 0) in the initial namespace.
Otherwise `RootlessCgroups` is set to true.
(Hint: if `RootlessEUID` is true, `RootlessCgroups` becomes true as well)
When runc is executed as the root (euid == 0) in an user namespace (e.g. by Docker-in-LXD, Podman, Usernetes),
`RootlessEUID` is set to false but `RootlessCgroups` is set to true.
So, "runc-in-userns" behaves almost same as "rootful" runc except that cgroups errors are ignored.
This PR does not have any impact on CLI flags and `state.json`.
Note about CLI:
* Now `runc --rootless=(auto|true|false)` CLI flag is only used for setting `RootlessCgroups`.
* Now `runc spec --rootless` is only required when `RootlessEUID` is set to true.
For runc-in-userns, `runc spec` without `--rootless` should work, when sufficient numbers of
UID/GID are mapped.
Note about `$XDG_RUNTIME_DIR` (e.g. `/run/user/1000`):
* `$XDG_RUNTIME_DIR` is ignored if runc is being executed as the root (euid == 0) in the initial namespace, for backward compatibility.
(`/run/runc` is used)
* If runc is executed as the root (euid == 0) in an user namespace, `$XDG_RUNTIME_DIR` is honored if `$USER != "" && $USER != "root"`.
This allows unprivileged users to allow execute runc as the root in userns, without mounting writable `/run/runc`.
Note about `state.json`:
* `rootless` is set to true when `RootlessEUID == true && RootlessCgroups == true`.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Previously if oomScoreAdj was not set in config.json we would implicitly
set oom_score_adj to 0. This is not allowed according to the spec:
> If oomScoreAdj is not set, the runtime MUST NOT change the value of
> oom_score_adj.
Change this so that we do not modify oom_score_adj if oomScoreAdj is not
present in the configuration. While this modifies our internal
configuration types, the on-disk format is still compatible.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
About Intel RDT/CAT feature:
Intel platforms with new Xeon CPU support Intel Resource Director Technology
(RDT). Cache Allocation Technology (CAT) is a sub-feature of RDT, which
currently supports L3 cache resource allocation.
This feature provides a way for the software to restrict cache allocation to a
defined 'subset' of L3 cache which may be overlapping with other 'subsets'.
The different subsets are identified by class of service (CLOS) and each CLOS
has a capacity bitmask (CBM).
For more information about Intel RDT/CAT can be found in the section 17.17
of Intel Software Developer Manual.
About Intel RDT/CAT kernel interface:
In Linux 4.10 kernel or newer, the interface is defined and exposed via
"resource control" filesystem, which is a "cgroup-like" interface.
Comparing with cgroups, it has similar process management lifecycle and
interfaces in a container. But unlike cgroups' hierarchy, it has single level
filesystem layout.
Intel RDT "resource control" filesystem hierarchy:
mount -t resctrl resctrl /sys/fs/resctrl
tree /sys/fs/resctrl
/sys/fs/resctrl/
|-- info
| |-- L3
| |-- cbm_mask
| |-- min_cbm_bits
| |-- num_closids
|-- cpus
|-- schemata
|-- tasks
|-- <container_id>
|-- cpus
|-- schemata
|-- tasks
For runc, we can make use of `tasks` and `schemata` configuration for L3 cache
resource constraints.
The file `tasks` has a list of tasks that belongs to this group (e.g.,
<container_id>" group). Tasks can be added to a group by writing the task ID
to the "tasks" file (which will automatically remove them from the previous
group to which they belonged). New tasks created by fork(2) and clone(2) are
added to the same group as their parent. If a pid is not in any sub group, it
Is in root group.
The file `schemata` has allocation bitmasks/values for L3 cache on each socket,
which contains L3 cache id and capacity bitmask (CBM).
Format: "L3:<cache_id0>=<cbm0>;<cache_id1>=<cbm1>;..."
For example, on a two-socket machine, L3's schema line could be `L3:0=ff;1=c0`
which means L3 cache id 0's CBM is 0xff, and L3 cache id 1's CBM is 0xc0.
The valid L3 cache CBM is a *contiguous bits set* and number of bits that can
be set is less than the max bit. The max bits in the CBM is varied among
supported Intel Xeon platforms. In Intel RDT "resource control" filesystem
layout, the CBM in a group should be a subset of the CBM in root. Kernel will
check if it is valid when writing. e.g., 0xfffff in root indicates the max bits
of CBM is 20 bits, which mapping to entire L3 cache capacity. Some valid CBM
values to set in a group: 0xf, 0xf0, 0x3ff, 0x1f00 and etc.
For more information about Intel RDT/CAT kernel interface:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
An example for runc:
Consider a two-socket machine with two L3 caches where the default CBM is
0xfffff and the max CBM length is 20 bits. With this configuration, tasks
inside the container only have access to the "upper" 80% of L3 cache id 0 and
the "lower" 50% L3 cache id 1:
"linux": {
"intelRdt": {
"l3CacheSchema": "L3:0=ffff0;1=3ff"
}
}
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Updated logrus to use v1 which includes a breaking name change Sirupsen -> sirupsen.
This includes a manual edit of the docker term package to also correct the name there too.
Signed-off-by: Steven Hartland <steven.hartland@multiplay.co.uk>
This enables the support for the rootless container mode. There are many
restrictions on what rootless containers can do, so many different runC
commands have been disabled:
* runc checkpoint
* runc events
* runc pause
* runc ps
* runc restore
* runc resume
* runc update
The following commands work:
* runc create
* runc delete
* runc exec
* runc kill
* runc list
* runc run
* runc spec
* runc state
In addition, any specification options that imply joining cgroups have
also been disabled. This is due to support for unprivileged subtree
management not being available from Linux upstream.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
`HookState` struct should follow definition of `State` in runtime-spec:
* modify json name of `version` to `ociVersion`.
* Remove redundant `Rootfs` field as rootfs can be retrived from
`bundlePath/config.json`.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Namely, use an undocumented feature of pivot_root(2) where
pivot_root(".", ".") is actually a feature and allows you to make the
old_root be tied to your /proc/self/cwd in a way that makes unmounting
easy. Thanks a lot to the LXC developers which came up with this idea
first.
This is the first step of many to allowing runC to work with a
completely read-only rootfs.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
It's possible that `cmd.Process` is still nil when we reach timeout.
Start creates `Process` field synchronously, and there is no way to such
race.
Signed-off-by: Alexander Morozov <lk4d4math@gmail.com>
This adds an `--no-new-keyring` flag to run and create so that a new
session keyring is not created for the container and the calling
processes keyring is inherited.
Fixes#818
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
No substantial code change.
Note that some style errors reported by `golint` are not fixed due to possible compatibility issues.
Signed-off-by: Akihiro Suda <suda.kyoto@gmail.com>
This updates runc and libcontainer to handle rlimits per process and set
them correctly for the container.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This commit adds support to libcontainer to allow caps, no new privs,
apparmor, and selinux process label to the process struct so that it can
be used together of override the base settings on the container config
per individual process.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This is needed to make 'runc delete' correctly run the post-stop hooks.
Signed-off-by: Julian Friedman <julz.friedman@uk.ibm.com>
Signed-off-by: Ed King <eking@pivotal.io>
Right now config.Privatefs is a boolean which determines if / is applied
with propagation flag syscall.MS_PRIVATE | syscall.MS_REC or not.
Soon we want to represent other propagation states like private, [r]slave,
and [r]shared. So either we can introduce more boolean variable or keep
track of propagation flags in an integer variable. Keeping an integer
variable is more versatile and can allow various kind of propagation flags
to be specified. So replace Privatefs with RootPropagation which is an
integer.
Note, this will require changes in docker. Instead of setting Privatefs
to true, they will need to set.
config.RootPropagation = syscall.MS_PRIVATE | syscall.MS_REC
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Ruediger Pluem