Define sizeof(int) as a constant, and also return ENOSYS earlier in the
filter if it doesn't increase the number of instructions we generate
(this is a negligible performance improvement but it does make it easier
to understand the generated filter stub).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
On s390x, syscalls above 255 are multiplexed using the (now otherwise
unused) setup(2) syscall (syscall number 0). If the kernel supports the
syscall then it will correctly translate the syscall number such that
seccomp will correctly detect it -- however, for unknown syscalls the
syscall number remains unchanged. This can be verified by running the
following program under strace:
int main(void)
{
scmp_filter_ctx ctx = seccomp_init(SCMP_ACT_TRAP);
seccomp_load(ctx);
return syscall(439, AT_FDCWD, "asdf", X_OK, 0);
}
Which will then die with the following signal (on pre-5.8 kernels):
--- SIGSYS {si_signo=SIGSYS, si_code=SYS_SECCOMP,
si_call_addr=0x3ffb3006c22, si_syscall=__NR_setup,
si_arch=AUDIT_ARCH_S390X} ---
(Note that the si_syscall is __NR_setup, not __NR_faccessat2.)
As a result, the -ENOSYS handling we had previously did not work
completely correctly on s390x because any syscall not supported by the
kernel would be treated as syscall number 0 rather than the actual
syscall number.
Always returning -ENOSYS will not cause any issues because in all of the
cases where this multiplexing occurs, seccomp will see the remapped
syscall number -- and no userspace program will call setup(2)
intentionally (the syscall has not existed in Linux for decades and was
originally a hack used early in Linux init prior to spawning pid1 -- so
you will get -ENOSYS from the kernel anyway).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Two new seccomp actions have been added to the libseccomp-golang
dependency, which can be now supported by runc, too.
ActKillThread kills the thread that violated the rule. It is the same as
ActKill. All other threads from the same thread group will continue to
execute.
ActKillProcess kills the process that violated the rule. All threads in
the thread group are also terminated. This action is only usable when
libseccomp API level 3 or higher is supported.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
These are just boilerplate and are only really useful for the two
actions which require us to set a default errno/aux value (ActErrno and
ActTrace).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
This commit implements support for the SCMP_ACT_NOTIFY action. It
requires libseccomp-2.5.0 to work but runc still works with older
libseccomp if the seccomp policy does not use the SCMP_ACT_NOTIFY
action.
A new synchronization step between runc[INIT] and runc run is introduced
to pass the seccomp fd. runc run fetches the seccomp fd with pidfd_get
from the runc[INIT] process and sends it to the seccomp agent using
SCM_RIGHTS.
As suggested by @kolyshkin, we also make writeSync() a wrapper of
writeSyncWithFd() and wrap the error there. To avoid pointless errors,
we made some existing code paths just return the error instead of
re-wrapping it. If we don't do it, error will look like:
writing syncT <act>: writing syncT: <err>
By adjusting the code path, now they just look like this
writing syncT <act>: <err>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Co-authored-by: Rodrigo Campos <rodrigo@kinvolk.io>
Go 1.17 introduce this new (and better) way to specify build tags.
For more info, see https://golang.org/design/draft-gobuild.
As a way to seamlessly switch from old to new build tags, gofmt (and
gopls) from go 1.17 adds the new tags along with the old ones.
Later, when go < 1.17 is no longer supported, the old build tags
can be removed.
Now, as I started to use latest gopls (v0.7.1), it adds these tags
while I edit. Rather than to randomly add new build tags, I guess
it is better to do it once for all files.
Mind that previous commits removed some tags that were useless,
so this one only touches packages that can at least be built
on non-linux.
Brought to you by
go1.17 fmt ./...
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For files that end with _linux.go or _linux_test.go, there is no need to
specify linux build tag, as it is assumed from the file name.
In addition, rename libcontainer/notify_linux_v2.go -> libcontainer/notify_v2_linux.go
for the file name to make sense.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fixes using runc with podman on my system (Fedora 34).
> $ podman --runtime `pwd`/runc run --rm --memory 4M fedora echo it works
> Error: unable to start container process: error adding seccomp filter rule for syscall bdflush: permission denied: OCI permission denied
The problem is, libseccomp returns EPERM when a redundant rule (i.e. the
rule with the same action as the default one) is added, and podman (on
my machine) sets the following rules in config.json:
<....>
"seccomp": {
"defaultAction": "SCMP_ACT_ERRNO",
"architectures": [
"SCMP_ARCH_X86_64",
"SCMP_ARCH_X86",
"SCMP_ARCH_X32"
],
"syscalls": [
{
"names": [
"bdflush",
"io_pgetevents",
<....>
],
"action": "SCMP_ACT_ERRNO",
"errnoRet": 1
},
<....>
(Note that defaultErrnoRet is not set, but it defaults to 1).
With this commit, it works:
> $ podman --runtime `pwd`/runc run --memory 4M fedora echo it works
> it works
Add an integration test (that fails without the fix).
Similar crun commit:
* https://github.com/containers/crun/commit/08229f3fb904c5ea19a7d9
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Rather than silently ignoring unknown syscalls, print a warning.
While at it, fix imports ordering (stdlib, others, ours).
[v2: demote Warn to Debug]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Do this for all errors except one from unix.*.
This fixes a bunch of errorlint warnings, like these
libcontainer/generic_error.go:25:15: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
if le, ok := err.(Error); ok {
^
libcontainer/factory_linux_test.go:145:14: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
lerr, ok := err.(Error)
^
libcontainer/state_linux_test.go:28:11: type assertion on error will fail on wrapped errors. Use errors.As to check for specific errors (errorlint)
_, ok := err.(*stateTransitionError)
^
libcontainer/seccomp/patchbpf/enosys_linux.go:88:4: switch on an error will fail on wrapped errors. Use errors.Is to check for specific errors (errorlint)
switch err {
^
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This should result in no change when the error is printed, but make the
errors returned unwrappable, meaning errors.As and errors.Is will work.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
gofumpt (mvdan.cc/gofumpt) is a fork of gofmt with stricter rules.
Brought to you by
git ls-files \*.go | grep -v ^vendor/ | xargs gofumpt -s -w
Looking at the diff, all these changes make sense.
Also, replace gofmt with gofumpt in golangci.yml.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Most of these were false positives or cases where we want to ignore the
lint, but the change to the BPF generation is actually useful.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
TestPatchHugeSeccompFilterDoesNotBlock is only testing the
disassembleFilter function. There is no need to invoke PatchAndLoad
which has the side effect of loading a seccomp profile.
Co-authored-by: Danail Branekov <danailster@gmail.com>
Co-authored-by: Kieron Browne <kbrowne@vmware.com>
Signed-off-by: Kieron Browne <kbrowne@vmware.com>
Signed-off-by: Danail Branekov <danailster@gmail.com>
There is a potential deadlock where the ExportBPF method call writes to
a pipe but the pipe is not read until after the method call returns.
ExportBPF might fill the pipe buffer, in which case it will block
waiting for a read on the other side which can't happen until the method
returns.
Here we concurrently read from the pipe into a buffer to ensure
ExportBPF will always return.
Co-authored-by: Kieron Browne <kbrowne@vmware.com>
Co-authored-by: Danail Branekov <danailster@gmail.com>
Signed-off-by: Kieron Browne <kbrowne@vmware.com>
Signed-off-by: Danail Branekov <danailster@gmail.com>
This test fails to compile on i386:
> libcontainer/seccomp/patchbpf/enosys_linux_test.go:180:20: constant 3735928559 overflows int
> libcontainer/seccomp/patchbpf/enosys_linux_test.go:204:19: constant 3735928559 overflows int
> libcontainer/seccomp/patchbpf/enosys_linux_test.go:227:25: constant 3735928559 overflows int
This is because golang.org/x/net/bpf returns an int from their emulated
BPF VM implementation when they should really be returning uint32.
Fix by switching to uint32 in the test code.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The correct way to do that conversion according to
https://pkg.go.dev/syscall#Errno is:
```
err = nil
if errno != 0 {
err = errno
}
```
In this case the error check will always report a false positive in
unix.RawSyscall(unix.SYS_SECCOMP, ...), probably nobody has faced this
problem because the code takes the other path in most of the cases.
Fixes: 7a8d7162f9 ("seccomp: prepend -ENOSYS stub to all filters")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
This function is called by `InitSeccomp`, but only when compiled
with seccomp (and cgo) enabled, so should not be needed for other
situations.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Having -EPERM is the default was a fairly significant mistake from a
future-proofing standpoint in that it makes any new syscall return a
non-ignorable error (from glibc's point of view). We need to correct
this now because faccessat2(2) is something glibc critically needs to
have support for, but they're blocked on container runtimes because we
return -EPERM unconditionally (leading to confusion in glibc). This is
also a problem we're probably going to keep running into in the future.
Unfortunately there are several issues which stop us from having a clean
solution to this problem:
1. libseccomp has several limitations which require us to emulate
behaviour we want:
a. We cannot do logic based on syscall number, meaning we cannot
specify a "largest known syscall number";
b. libseccomp doesn't know in which kernel version a syscall was
added, and has no API for "minimum kernel version" so we cannot
simply ask libseccomp to generate sane -ENOSYS rules for us.
c. Additional seccomp rules for the same syscall are not treated as
distinct rules -- if rules overlap, seccomp will merge them. This
means we cannot add per-syscall -EPERM fallbacks;
d. There is no inverse operation for SCMP_CMP_MASKED_EQ;
e. libseccomp does not allow you to specify multiple rules for a
single argument, making it impossible to invert OR rules for
arguments.
2. The runtime-spec does not have any way of specifying:
a. The errno for the default action;
b. The minimum kernel version or "newest syscall at time of profile
creation"; nor
c. Which syscalls were intentionally excluded from the allow list
(weird syscalls that are no longer used were excluded entirely,
but Docker et al expect those syscalls to get EPERM not ENOSYS).
3. Certain syscalls should not return -ENOSYS (especially only for
certain argument combinations) because this could also trigger glibc
confusion. This means we have to return -EPERM for certain syscalls
but not as a global default.
4. There is not an obvious (and reasonable) upper limit to syscall
numbers, so we cannot create a set of rules for each syscall above
the largest syscall number in libseccomp. This means we must handle
inverse rules as described below.
5. Any syscall can be specified multiple times, which can make
generation of hotfix rules much harder.
As a result, we have to work around all of these things by coming up
with a heuristic to stop the bleeding. In the future we could hopefully
improve the situation in the runtime-spec and libseccomp.
The solution applied here is to prepend a "stub" filter which returns
-ENOSYS if the requested syscall has a larger syscall number than any
syscall mentioned in the filter. The reason for this specific rule is
that syscall numbers are (roughly) allocated sequentially and thus newer
syscalls will (usually) have a larger syscall number -- thus causing our
filters to produce -ENOSYS if the filter was written before the syscall
existed.
Sadly this is not a perfect solution because syscalls can be added
out-of-order and the syscall table can contain holes for several
releases. Unfortuntely we do not have a nicer solution at the moment
because there is no library which provides information about which Linux
version a syscall was introduced in. Until that exists, this workaround
will have to be good enough.
The above behaviour only happens if the default action is a blocking
action (in other words it is not SCMP_ACT_LOG or SCMP_ACT_ALLOW). If the
default action is permissive then we don't do any patching.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Multiple conditions were previously allowed to be placed upon the
same syscall argument. Restore this behavior.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Use unix.Prctl() instead of manually reimplementing it using
unix.RawSyscall. Also use unix.SECCOMP_MODE_FILTER instead of locally
defining it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Since syscall is outdated and broken for some architectures,
use x/sys/unix instead.
There are still some dependencies on the syscall package that will
remain in syscall for the forseeable future:
Errno
Signal
SysProcAttr
Additionally:
- os still uses syscall, so it needs to be kept for anything
returning *os.ProcessState, such as process.Wait.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
The `bufio.Scanner.Scan` method returns false either by reaching the
end of the input or an error. After Scan returns false, the Err method
will return any error that occurred during scanning, except that if it
was io.EOF, Err will return nil.
We should check the error when Scan return false(out of the for loop).
Signed-off-by: Wang Long <long.wanglong@huawei.com>
No substantial code change.
Note that some style errors reported by `golint` are not fixed due to possible compatibility issues.
Signed-off-by: Akihiro Suda <suda.kyoto@gmail.com>
This commit allows additional architectures to be added to Seccomp filters
created by containers. This allows containers to make syscalls using these
architectures. For example, in a container on an AMD64 system, only AMD64
syscalls would be usable unless x86 was added to the filter using this patch,
which would allow both 32-bit and 64-bit syscalls to be used.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Alban Crequy