Add a test to check that container.Run do not leak file descriptors.
Before the previous commit, it fails like this:
exec_test.go:2030: extra fd 8 -> socket:[659703]
exec_test.go:2030: extra fd 11 -> socket:[658715]
exec_test.go:2033: found 2 extra fds after container.Run
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Using per cgroup manager dbus connection instances means
that every cgroup manager instance gets a new connection,
and those connections are never closed, ultimately resulting
in file descriptors limit being hit.
Revert back to using a single global dbus connection for everything,
without changing the callers.
NOTE that it is assumed a runtime can't use both root and rootless
dbus at the same time. If this happens, we panic.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 47ef9a104f forgot to wrap GetManagerProperty("ControlGroup")
into retryOnDisconnect. Since there's one other user of
GetManagerProperty, add getManagerProperty wrapper and use it.
Fixes: 47ef9a104f
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
I hate to keep adding those kludges, but lately TestFreeze (and
TestSystemdFreeze) from libcontainer/integration fails a lot. The
failure comes and goes, and is probably this is caused by a slow host
allocated for the test, and a slow VM on top of it.
To remediate, add a small sleep on every 25th iteration in between
asking the kernel to freeze and checking its status.
In the worst case scenario (failure to freeze), this adds about 0.4 ms
(40 x 10 us) to the duration of the call.
It is hard to measure how this affects CI as GHA plays a roulette when
allocating a node to run the test on, but it seems to help. With
additional debug info, I saw somewhat frequent "frozen after 24 retries"
or "frozen after 49 retries", meaning it succeeded right after the added
sleep.
While at it, rewrite/improve the comments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Akihiro Suda (4):
Revert "Makefile: rm go 1.13 workaround"
libcontainer: avoid using t.Cleanup
go.mod: demote to Go 1.13
CI: enable Go 1.13 again
LGTMs: kolyskhin cyphar
Closes#2925
t.Cleanup is not present in Go 1.13.
Dockre/Moby still builds runc with Go 1.13, so we should still support
Go 1.13.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
A cgroup manager's Set method sets cgroup resources, but historically
it was accepting configs.Cgroups.
Refactor it to accept resources only. This is an improvement from the
API point of view, as the method can not change cgroup configuration
(such as path to the cgroup etc), it can only set (modify) its
resources/limits.
This also lays the foundation for complicated resource updates, as now
Set has two sets of resources -- the one that was previously specified
during cgroup manager creation (or the previous Set), and the one passed
in the argument, so it could deduce the difference between these. This
is a long term goal though.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For some reason, systemd cgroup v2 driver's Set is not using its
container argument when generating systemd unit properties.
This bug is not detected by our update tests as we run a new binary
every time and thus a new instance of a cgroup manager.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 88e8350de2, among the other things, replaced filepath.Join with
securejoin.SecureJoin for both reads and writes to cgroupfs.
Commits e76ac1c054 and 31f0f5b7e0 switched more code to use
fscommon.ReadFile (and thus securejoin). Commit 0228226e6d introduced
fscommon.OpenFile (which uses securejoin as the fallback if openat2(2)
is not available, which is the case for older kernels), and commit
c95e69007c switched most of cgroup/fs[2] code to use it.
As a result, fs.GetStats() method became noticeable slower, mostly due
to securejoin calling os.Lstat and filepath.Clean.
Using securejoin as a security measure for cgroupfs files is
not well justified, as cgroupfs do not contain symlinks, and none of the
code using it have uncleaned paths. In particular, fs/fs2/systemd
managers do check and sanitize their paths.
This commit modifies the code to not use securejoin. Instead, it checks
that the opened file is indeed on cgroupfs.
Using BenchmarkGetStats on a CentOS 8 VM, I see the following
improvement:
Before:
> BenchmarkGetStats-8 8376 625135 ns/op
After:
> BenchmarkGetStats-8 12226 485015 ns/op
An intermediate version, with no fstatfs to check fstype:
> BenchmarkGetStats-8 13162 452281 ns/op
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of reconnecting to dbus after some failed operations, and
returning an error (so a caller has to retry), reconnect AND retry
in place for all such operations.
This should fix issues caused by a stale dbus connection after e.g.
a dbus daemon restart.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
[@kolyshkin: doc nits, use dbus.ErrClosed and isDbusError]
Signed-off-by: Shiming Zhang <wzshiming@foxmail.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Generalize isUnitExists as isDbusError, and use errors.As while at it
(which can handle wrapped errors as well).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case openat2() is not available, it does not make sense to calculate
relpath (and check if path has /sys/fs/cgroup prefix).
Reverse the order of checks to not do that in case openat2 is not
available.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
We shouldn't refuse to build on architectures just because we don't know
what the syscall number of memfd_create(2) is. In addition, use the
correct defined(...) macros for ppc64 (these are the ones glibc uses).
Fixes: 3aead32ea2 ("nsenter: hard-code memfd_create(2) syscall numbers")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Function (*FreezerGroup).Set has a few paths where in can return an
error. In any case, if an error is returned, we failed to freeze,
and we need to thaw to avoid leaving the cgroup in a stuck state.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case of rootless, cgroup2 mount is not possible (see [1] for more
details), so since commit 9c81440fb5 runc bind-mounts the whole
/sys/fs/cgroup into container.
Problem is, if cgroupns is enabled, /sys/fs/cgroup inside the container
is supposed to show the cgroup files for this cgroup, not the root one.
The fix is to pass through and use the cgroup path in case cgroup2
mount failed, cgroupns is enabled, and the path is non-empty.
Surely this requires the /sys/fs/cgroup mount in the spec, so modify
runc spec --rootless to keep it.
Before:
$ ./runc run aaa
# find /sys/fs/cgroup/ -type d
/sys/fs/cgroup
/sys/fs/cgroup/user.slice
/sys/fs/cgroup/user.slice/user-1000.slice
/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service
...
# ls -l /sys/fs/cgroup/cgroup.controllers
-r--r--r-- 1 nobody nogroup 0 Feb 24 02:22 /sys/fs/cgroup/cgroup.controllers
# wc -w /sys/fs/cgroup/cgroup.procs
142 /sys/fs/cgroup/cgroup.procs
# cat /sys/fs/cgroup/memory.current
cat: can't open '/sys/fs/cgroup/memory.current': No such file or directory
After:
# find /sys/fs/cgroup/ -type d
/sys/fs/cgroup/
# ls -l /sys/fs/cgroup/cgroup.controllers
-r--r--r-- 1 root root 0 Feb 24 02:43 /sys/fs/cgroup/cgroup.controllers
# wc -w /sys/fs/cgroup/cgroup.procs
2 /sys/fs/cgroup/cgroup.procs
# cat /sys/fs/cgroup/memory.current
577536
[1] https://github.com/opencontainers/runc/issues/2158
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The code is already passing three parameters around from
mountToRootfs to mountCgroupV* to mountToRootfs again.
I am about to add another parameter, so let's introduce and
use struct mountConfig to pass around.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Per OCI runtime spec, mount destination MUST be absolute. Let's check
that and return an error if not.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since commit 88e8350de2 the error message is different, so the check
is not working. In addition, for the cgroup v2 case, and it seems that
PID controller is always available these days.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Do not create the same container named "test" over and over.
2. Fix randomization issues when generating container and cgroup names.
The issues were:
* math/rand used without seeding
* complex rand/md5/hexencode sequence
In both cases, replace with nanosecond time encoded with digits and
lowercase letters.
3. Add test name to container and cgroup names. For example, this is
how systemd log has changed:
Before: Started libcontainer container test16ddfwutxgjte.
After: Started libcontainer container TestPidsSystemd-4oaqvr.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This helps a lot to find out where the errors come from.
Before:
> level=warning msg="lstat /sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/test_hello: no such file or directory"
After:
> level=warning msg="lstat /sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/test_hello: no such file or directory" func=github.com/opencontainers/runc/libcontainer.destroy file="github.com/opencontainers/runc/libcontainer/state_linux.go:44"
Presumably this comes with an overhead, but I guess no one is using
--debug by default anyway.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 5d0ffbf9c8 added OOM kill count checking and better container
start/run/exec error reporting in case we hit OOM.
It also introduced warnings like these:
> level=warning msg="unable to get oom kill count" error="openat2
> /sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/test_hello/memory.events:
> no such file or directory"
In case of rootless containers, unless cgroup is delegated or systemd is
used, runc can not create a cgroup and thus it fails to get OOM kill
count. This is expected, and the warning should not be shown in this
case.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For fs, commit fc620fdf81 made rootless field private,
and for fs2, it was always private, and yet comments in both
mention it as m.Rootless.
Fix it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Currently, runc fails like this when used from rootless podman
with host PID namespace:
> $ podman --runtime=runc run --pid=host --rm -it busybox sh
> WARN[0000] additional gid=10 is not present in the user namespace, skip setting it
> Error: container_linux.go:380: starting container process caused:
> process_linux.go:545: container init caused: readonly path /proc/asound:
> operation not permitted: OCI permission denied
(Here /proc/asound is the first path from OCI spec's readonlyPaths).
The code uses MS_BIND|MS_REMOUNT flags that have a special meaning in
the kernel ("keep the flags like nodev, nosuid, noexec as is").
For some reason, this "special meaning" trick is not working for the
above use case (rootless podman + no PID namespace), and I don't know
how to reproduce this without podman.
Instead of relying on the kernel feature, let's just get the current
mount flags using fstatfs(2) and add those that needs to be preserved.
While at it, wrap errors from unix.Mount into os.PathError to make
errors a bit less cryptic.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Caught by golangci-lint when enabling golint:
libcontainer/cgroups/ebpf/ebpf.go:35:12: SA1019: prog.Attach is deprecated: use link.RawAttachProgram instead. (staticcheck)
if err := prog.Attach(dirFD, ebpf.AttachCGroupDevice, unix.BPF_F_ALLOW_MULTI); err != nil {
^
libcontainer/cgroups/ebpf/ebpf.go:39:13: SA1019: prog.Detach is deprecated: use link.RawDetachProgram instead. (staticcheck)
if err := prog.Detach(dirFD, ebpf.AttachCGroupDevice, unix.BPF_F_ALLOW_MULTI); err != nil {
^
Worth noting that we currently call prog.Detach() with unix.BPF_F_ALLOW_MULTI;
https://github.com/golang/sys/blob/22da62e12c0cd9c1da93581e1113ca4d82a5be14/unix/zerrors_linux.go#L178
BPF_F_ALLOW_MULTI = 0x2
Looking at the source code for prog.Detach(); https://github.com/cilium/ebpf/blob/v0.4.0/prog.go#L579-L581,
this would _always_ produce an error:
if flags != 0 {
return errors.New("flags must be zero")
}
Note that the flags parameter is not used (except for that validation)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Kir Kolyshkin