systemd emits very loud warnings when the path specified doesn't exist
(which can be the case for some of our default rules). We don't need the
ruleset we give systemd to be completely accurate (we discard some kinds
of wildcard rules anyway) so we can safely skip adding these.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Remove upper bound in integer sanity check
to not restrict the number of socket-activated
sockets passed in.
Closes#3488
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
(cherry picked from commit 03a210d0f2)
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
The CAP_CHECKPOINT_RESTORE linux capability provides the ability to
update /proc/sys/kernel/ns_last_pid. However, because this file is under
/proc, and by default both K8s and CRI-O specify that /proc/sys should
be mounted as Read-Only, by default even with the capability specified,
a process will not be able to write to ns_last_pid.
To get around this, a pod author can specify a volume mount and a
hostpath to bind-mount /proc/sys/kernel/ns_last_pid. However, runc does
not allow specifying mounts under /proc.
This commit adds /proc/sys/kernel/ns_last_pid to the validProcMounts
string array to enable a pod author to mount ns_last_pid as read-write.
The default remains unchanged; unless explicitly requested as a volume
mount, ns_last_pid will remain read-only regardless of whether or not
CAP_CHECKPOINT_RESTORE is specified.
Signed-off-by: Irwin D'Souza <dsouzai.gh@gmail.com>
On s390x, syscalls above 255 are multiplexed using the (now otherwise
unused) setup(2) syscall (syscall number 0). If the kernel supports the
syscall then it will correctly translate the syscall number such that
seccomp will correctly detect it -- however, for unknown syscalls the
syscall number remains unchanged. This can be verified by running the
following program under strace:
int main(void)
{
scmp_filter_ctx ctx = seccomp_init(SCMP_ACT_TRAP);
seccomp_load(ctx);
return syscall(439, AT_FDCWD, "asdf", X_OK, 0);
}
Which will then die with the following signal (on pre-5.8 kernels):
--- SIGSYS {si_signo=SIGSYS, si_code=SYS_SECCOMP,
si_call_addr=0x3ffb3006c22, si_syscall=__NR_setup,
si_arch=AUDIT_ARCH_S390X} ---
(Note that the si_syscall is __NR_setup, not __NR_faccessat2.)
As a result, the -ENOSYS handling we had previously did not work
completely correctly on s390x because any syscall not supported by the
kernel would be treated as syscall number 0 rather than the actual
syscall number.
Always returning -ENOSYS will not cause any issues because in all of the
cases where this multiplexing occurs, seccomp will see the remapped
syscall number -- and no userspace program will call setup(2)
intentionally (the syscall has not existed in Linux for decades and was
originally a hack used early in Linux init prior to spawning pid1 -- so
you will get -ENOSYS from the kernel anyway).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
(on Go 1.18 this is actually an error)
> libcontainer/factory_linux.go:341:10: fmt.Errorf format %w has arg e of wrong type interface{}
Unfortunately, fixing it results in an errorlint warning:
> libcontainer/factory_linux.go#L344 non-wrapping format verb for fmt.Errorf. Use `%w` to format errors (errorlint)
so we have to silence that one.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 907aefd43c)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Do not set inheritable capabilities in runc spec, runc exec --cap,
and in libcontainer integration tests.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
What used to be godoc.org is now pkg.go.dev, and while the old URLs
still work, they might be broken in the future.
Updated badges are generated via https://pkg.go.dev/badge/
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit f309a69a48)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case statfs("/sys/fs/cgroup/unified") fails with any error other
than ENOENT, current code panics. As IsCgroup2HybridMode is called from
libcontainer/cgroups/fs's init function, this means that any user of
libcontainer may panic during initialization, which is ugly.
Avoid panicking; instead, do not enable hybrid hierarchy support and
report the error (under debug level, not to confuse anyone).
Basically, replace the panic with "turn off hybrid mode support"
(which makes total sense since we were unable to statfs its root).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Don't require CAT or MBA because we don't detect those correctly (we
don't support L2 or L3DATA/L3CODE for example, and in the future
possibly even more). With plain "ClosId mode" we don't really care: we
assign the container to a pre-configured CLOS without trying to do
anything smarter.
Moreover, this was a duplicate/redundant check anyway, as for CAT and
MBA there is another specific sanity check that is done if L3 or MB
is specified in the config.
Signed-off-by: Markus Lehtonen <markus.lehtonen@intel.com>
(cherry picked from commit 1d5c331042)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Apparently, not all files listed in /sys/kernel/cgroup/delegate must
exist in every cgroup, so we should ignore ENOENT.
Dot not ignore ENOENT on the directory itself though.
Change cgroupFilesToChown to not return ".", and refactor it to not do
any dynamic slice appending in case we're using the default built-in
list of files.
Fixes: 35d20c4e0
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 8c04b98100)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case of a read-only /dev, it's better to move on and let whatever is
run in a container to handle any possible errors.
This solves runc exec for a user with read-only /dev.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 146c8c0c62)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since we already called fstat, we know the current file uid. In case it
is the same as the one we want it to be, there's no point in trying
chown.
Remove the specific /dev/null check, as the above also covers it
(comparing /dev/null uid with itself is true).
This also fixes runc exec with read-only /dev for root user.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 18c4760aed)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Use os/file Chown method instead of bare unix.Fchown as it already have
access to underlying fd, and produces nice-looking errors. This allows
us to remove our error wrapping and some linter annotations.
We still use unix.Fstat since os.Stat access to os-specific fields
like uid/gid is not very straightforward. The only change here is to use
file name (rather than fd) in the error text.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit b7fdb68848)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 4d1d6185ab added this
nsenter_unsupported.go file in order for nsenter to be a valid (but
empty, non-functional) Go package on unsupported platforms.
As a result, runc can be build successfully without CGO, which results
in a non-working and hard-to-debug binary (see issue 3330).
As the functionality of being able to compile a package which is
definitely not working is questionable, and I can't think of any use
cases, let's remove the file.
With this, runc can no longer be build without CGO:
[kir@kir-rhat runc]$ CGO_ENABLED=0 make runc
go build -trimpath "-buildmode=pie" -tags "seccomp" -ldflags "-X main.gitCommit=v1.0.0-452-g00f56786-dirty -X main.version=1.1.0-rc.1+dev " -o runc .
go build github.com/opencontainers/runc/libcontainer/nsenter: build constraints exclude all Go files in /home/kir/go/src/github.com/opencontainers/runc/libcontainer/nsenter
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since commit 12e99a0f8d we do require Go >= 1.16, so this file
is no longer needed.
Also, this actually ensures that go >= 1.16 is used (otherwise
libcontainer/cgroups/getallpids.go won't compile).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The new mount option "rro" makes the mount point recursively read-only,
by calling `mount_setattr(2)` with `MOUNT_ATTR_RDONLY` and `AT_RECURSIVE`.
https://man7.org/linux/man-pages/man2/mount_setattr.2.html
Requires kernel >= 5.12.
The "rro" option string conforms to the proposal in util-linux/util-linux Issue 1501.
Fix issue 2823
Similary, this commit also adds the following mount options:
- rrw
- r[no]{suid,dev,exec,relatime,atime,strictatime,diratime,symfollow}
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
When writing netlink messages, it is possible to have a byte array
larger than UINT16_MAX which would result in the length field
overflowing and allowing user-controlled data to be parsed as control
characters (such as creating custom mount points, changing which set of
namespaces to allow, and so on).
Co-authored-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Since commit 7296dc1712, type intelRdtData is only used by tests,
and since commit 79d292b9f, its only member is config.
Change the test to use config directly, and remove the type.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It never returns any error, so let's drop it (in case it needs to be
re-added, it is easy to do so).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since commit 8850636eb3 (February 2015) this function is no longer
used (replaced by (*ConfigValidator).rootfs), so let's remove it,
together with its unit tests (which were added by commit 917c1f6d6 in
April 2016).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Delegating cgroups to the container enables more complex workloads,
including systemd-based workloads. The OCI runtime-spec was
recently updated to explicitly admit such delegation, through
specification of cgroup ownership semantics:
https://github.com/opencontainers/runtime-spec/pull/1123
Pursuant to the updated OCI runtime-spec, change the ownership of
the container's cgroup directory and particular files therein, when
using cgroups v2 and when the cgroupfs is to be mounted read/write.
As a result of this change, systemd workloads can run in isolated
user namespaces on OpenShift when the sandbox's cgroupfs is mounted
read/write.
It might be possible to implement this feature in other cgroup
managers, but that work is deferred.
Signed-off-by: Fraser Tweedale <ftweedal@redhat.com>
This is not used since commit 5e7b48f7c0 (23 Mar 2017).
In case there are external users, they should switch to
opencontainers/selinux.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Move test case comments to doc strings, and use t.Run.
Suggested-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
There is no need to run hooks when `Config.Hooks` is just an empty map,
(dlv) p p.config.Config.Hooks
github.com/opencontainers/runc/libcontainer/configs.Hooks []
Signed-off-by: Dave Chen <dave.chen@arm.com>
1. Instead of distinguishing between errors and warnings, let's treat all
errors as warnings, thus simplifying the code. This changes the
function behaviour for input like hugepages-BadNumberKb --
previously, the error from Atoi("BadNumber") was considered fatal,
now it's just another warnings.
2. Move the warning logging to HugePageSizes, thus simplifying the test
case, which no longer needs to read what logrus writes. Note that we
do not want to log all the warnings (as chances are very low we'll
get any, and if we do this means the code need to be updated), only
the first one.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
I have noticed that libct/cg/fs allocates 8K during init on every runc
execution:
> init github.com/opencontainers/runc/libcontainer/cgroups/fs @1.5 ms, 0.028 ms clock, 8512 bytes, 13 allocs
Apparently this is caused by global HugePageSizes variable init, which
is only used from GetStats (i.e. it is never used by runc itself).
Remove it, and use HugePageSizes() directly instead. Make it init-once,
so that GetStats (which, I guess, is periodically called by kubernetes)
does not re-read huge page sizes over and over.
This also removes 12 allocs and 8K from libct/cg/fs init section:
> $ time GODEBUG=inittrace=1 ./runc --help 2>&1 | grep cgroups/fs
> init github.com/opencontainers/runc/libcontainer/cgroups/fs @1.5 ms, 0.003 ms clock, 16 bytes, 1 allocs
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Since GetHugePageSize do not have any external users (checked by
sourcegraph), and no internal user ever uses its second return value
(the error), let's drop it.
2. Rename GetHugePageSize -> HugePageSizes (drop the Get prefix as per
Go guidelines, add suffix since we return many sizes).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Using null bytes as control characters for sending strings via netlink
opens us up to a user explicitly putting a null byte in a mount string
(which JSON will happily let you do) and then causing us to open a mount
path different to the one expected.
In practice this is more of an issue in an environment such as
Kubernetes where you may have path-based access control policies (which
are more susceptible to these kinds of flaws).
Found by Google Project Zero.
Fixes: 9c444070ec ("Open bind mount sources from the host userns")
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
As reported in [1], in a case where read-only fuse (sshfs) mount
is used as a volume without specifying ro flag, the kernel fails
to remount it (when adding various flags such as nosuid and nodev),
returning EPERM.
Here's the relevant strace line:
> [pid 333966] mount("/tmp/bats-run-PRVfWc/runc.RbNv8g/bundle/mnt", "/proc/self/fd/7", 0xc0001e9164, MS_NOSUID|MS_NODEV|MS_REMOUNT|MS_BIND|MS_REC, NULL) = -1 EPERM (Operation not permitted)
I was not able to reproduce it with other read-only mounts as the source
(tried tmpfs, read-only bind mount, and an ext2 mount), so somehow this
might be specific to fuse.
The fix is to check whether the source has RDONLY flag, and retry the
remount with this flag added.
A test case (which was kind of hard to write) is added, and it fails
without the fix. Note that rootless user need to be able to ssh to
rootless@localhost in order to sshfs to work -- amend setup scripts
to make it work, and skip the test if the setup is not working.
[1] https://github.com/containers/podman/issues/12205
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The staticcheck linter points out that the err != nil comparison
after system.Exec is always true:
> libcontainer/standard_init_linux.go#L253
> SA4023: this comparison is always true (staticcheck)
> libcontainer/system/linux.go#L43
> SA4023(related information): github.com/opencontainers/runc/libcontainer/system.Exec never returns a nil interface value (staticcheck)
Indeed, Exec either returns an error or does not return at all.
Remove the (useless) check.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Aleksa Sarai