Unless the container's runtime config has intelRdt configuration set,
any checks for whether Intel RDT is supported or the resctrl filesystem
is mounted are a waste of time as, per the OCI Runtime Spec, "the
runtime MUST NOT manipulate any resctrl pseudo-filesystems." And in the
likely case where Intel RDT is supported by both the hardware and
kernel but the resctrl filesystem is not mounted, these checks can get
expensive as the intelrdt package needs to parse mountinfo to check
whether the filesystem has been mounted to a non-standard path.
Optimize for the common case of containers with no intelRdt
configuration by only performing the checks when the container has opted
in.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit ea0bd78268)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The OCI runtime spec mandates "[i]f intelRdt is not set, the runtime
MUST NOT manipulate any resctrl pseudo-filesystems." Attempting to
delete files counts as manipulating, so stop doing that when the
container's RDT configuration is nil.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 56daf36be2)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The intelrdt package only needs to parse mountinfo to find the mount
point of the resctrl filesystem. Users are generally going to mount the
resctrl filesystem to the pre-created /sys/fs/resctrl directory, so
there is a common case where mountinfo parsing is not required. Optimize
for the common case with a fast path which checks both for the existence
of the /sys/fs/resctrl directory and whether the resctrl filesystem was
mounted to that path using a single statfs syscall.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit c156bde7cc)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reading /proc/cpuinfo is a surprisingly expensive operation. Since
kernel version 4.12 [1], opening /proc/cpuinfo on an x86 system can
block for around 20 milliseconds while the kernel samples the current
CPU frequency. There is a very recent patch [2] which gets rid of the
delay, but has yet to make it into the mainline kenel. Regardless,
kernels for which opening /proc/cpuinfo takes 20ms will continue to be
run in production for years to come. libcontainer only opens
/proc/cpuinfo to read the processor feature flags so all the delays to
get an accurate snapshot of the CPU frequency are just wasted time.
If we wanted to, we could interrogate the CPU features directly from
userspace using the `CPUID` instruction. However, Intel and AMD CPUs
have flags in different positions for their analogous sub-features and
there are CPU quirks [3] which would need to be accounted for. Some
Haswell server CPUs support RDT/CAT but are missing the `CPUID` flags
advertising their support; the kernel checks for support on that
processor family by probing the the hardware using privileged
RDMSR/WRMSR instructions [4]. This sort of probing could not be
implemented in userspace so it would not be possible to check for RDT
feature support in userspace without false negatives on some hardware
configurations.
It looks like libcontainer reads the CPU feature flags as a kind of
optimization so that it can skip checking whether the kernel supports an
RDT sub-feature if the hardware support is missing. As the kernel only
exposes subtrees in the `resctrl` filesystem for RDT sub-features with
hardware and kernel support, checking the CPU feature flags is redundant
from a correctness point of view. Remove the /proc/cpuinfo check as it
is an optimization which actually hurts performance.
[1]: https://unix.stackexchange.com/a/526679
[2]: https://lore.kernel.org/all/20220415161206.875029458@linutronix.de/
[3]: https://github.com/torvalds/linux/blob/7cf6a8a17f5b134b7e783c2d45c53298faef82a7/arch/x86/kernel/cpu/resctrl/core.c#L834-L851
[4]: https://github.com/torvalds/linux/blob/a6b450573b912316ad36262bfc70e7c3870c56d1/arch/x86/kernel/cpu/resctrl/core.c#L111-L153
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 9f107489b0)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This function is unused, and removing it simplifies the changes which
follow this commit.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 13674f43d3)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
[This is a manual port of commit dbd990d555 to release-1.1
branch. Original description follows.]
Remove intelrtd.Manager interface, since we only have a single
implementation, and do not expect another one.
Rename intelRdtManager to Manager, and modify its users accordingly.
Remove NewIntelRdtManager from factory.
Remove IntelRdtfs. Instead, make intelrdt.NewManager return nil if the
feature is not available.
Remove TestFactoryNewIntelRdt as it is now identical to TestFactoryNew.
Add internal function newManager to be used for tests (to make sure
some testing is done even when the feature is not available in
kernel/hardware).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
TestGetContainerStats test a function that is smaller than the test
itself, and only calls a couple of other functions (which are
represented by mocks). It does not make sense to have it.
mockIntelRdtManager is only needed for TestGetContainerStats
and TestGetContainerState, which basically tests that Path
is called. Also, it does not make much sense to have it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 85932850ec)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For the Nth time I wanted to replace parsing mountinfo with
statfs and the check for superblock magic, but it is not possible
since some code relies of mount options check which can only
be obtained via mountinfo.
Add a note about it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 5e201e7ce2)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In a (quite common) case RDT is not supported by the kernel/hardware,
it does not make sense to parse /proc/cpuinfo and /proc/self/mountinfo,
and yet the current code does it (on every runc exec, for example).
Fortunately, there is a quick way to check whether RDT is available --
if so, kernel creates /sys/fs/resctrl directory. Check its existence,
and skip all the other initialization if it's not present.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit edeb3b376c)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This test was written back in the day when findIntelRdtMountpointDir
was using its own mountinfo parser. Commit f1c1fdf911 changed that,
and thus this test is actually testing moby/sys/mountinfo parser, which
does not make much sense.
Remove the test, and drop the io.Reader argument since we no longer need
to parse a custom file.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 6c6b14e075)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case resctrl filesystem can not be found in /proc/self/mountinfo
(which is pretty common on non-server or non-x86 hardware), subsequent
calls to Root() will result in parsing it again and again.
Use sync.Once to avoid it. Make unit tests call it so that Root() won't
actually parse mountinfo in tests.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 02e961bcf9)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This aligns v2 usage calculations more closely with v1.
Current node-level reporting for v1 vs v2 on the same
machine under similar load may differ by ~250-750Mi.
Also return usage as combined swap + memory usage, aligned
with v1 and non-root v2 cgroups.
`mem_cgroup_usage` in the kernel counts NR_FILE_PAGES
+ NR_ANON_MAPPED + `nr_swap_pages` (if swap enabled) [^0].
Using total - free results in higher "usage" numbers.
This is likely due to various types of reclaimable
memory technically counted as in use (e.g. inactive anon).
See also https://github.com/kubernetes/kubernetes/issues/118916 for more context
[^0]: https://github.com/torvalds/linux/blob/06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5/mm/memcontrol.c#L3673-L3680
Signed-off-by: Alexander Eldeib <alexeldeib@gmail.com>
A few cases relied on the fact that systemd is used, and thus
/sys/fs/cgroup/user.slice is available.
Guess what, in case of "make unittest" it might not be.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 5c6b334c88)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Split the test into two -- for fs and systemd cgroup managers, and only
run the second one if systemd is available.
Prevents the following failure during `make unittest`:
> === RUN TestNilResources
> manager_test.go:27: systemd not running on this host, cannot use systemd cgroups manager
> --- FAIL: TestNilResources (0.22s)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 962019d64e)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
runc delete is supposed to remove all the container's artefacts.
In case systemd cgroup driver is used, and the systemd unit has failed
(e.g. oom-killed), systemd won't remove the unit (that is, unless the
"CollectMode: inactive-or-failed" property is set).
Call reset-failed from manager.Destroy so the failed unit will be
removed during "runc delete".
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 43564a7b55)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Sometimes we call resetFailedUnit as a cleanup measure, and we don't
care if it fails or not. So, move error reporting to its callers, and
ignore error in cases we don't really expect it to succeed.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 91b4cd25b7)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In code we have frozen the cgroup to avoid the processes get
an occasional "permission denied" error, while the systemd's application of device
rules is done disruptively. When the processes in the container can not
be frozen over 2 seconds (which defined in fs/freezer.go),
we still update the cgroup which resulting the container get an occasional
"permission denied" error in some cases.
Return error directly without updating cgroup, when freeze fails.
Fixes: #3803
Signed-off-by: Zoe <hi@zoe.im>
When a directory already exists (or after a container is restarted) the
perms of the directory being mounted to were being used even when a
different permission is set on the tmpfs mount options.
This prepends the original directory perms to the mount options.
If the perms were already set in the mount opts then those perms will
win.
This eliminates the need to perform a chmod after mount entirely.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 9fa8b9de3e)
Resolved conflicts:
tests/integration/run.bats
Signed-off-by: Bjorn Neergaard <bjorn.neergaard@docker.com>
When given an environment variable that is invalid, it's not a good idea
to output the contents in case they are supposed to be private (though
such a container wouldn't start anyway so it seems unlikely there's a
real way to use this to exfiltrate environment variables you didn't
already know).
Reported-by: Carl Henrik Lunde <chlunde@ifi.uio.no>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
(cherry picked from commit 20e38fb2b1)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For a previous attempt to fix that (and added test cases), see commit
9087f2e827.
Alas, it's not always working because of cgroup directory TOCTOU.
To solve this and avoid the race, add an error _after_ the operation.
Implement it as a method that ignores the error that should be ignored.
Instead of currentStatus(), use faster runType(), since we are not
interested in Paused status here.
For Processes(), remove the pre-op check, and only use it after getting
an error, making the non-error path more straightforward.
For Signal(), add a second check after getting an error. The first check
is left as is because signalAllProcesses might print a warning if the
cgroup does not exist, and we'd like to avoid that.
This should fix an occasional failure like this one:
not ok 84 kill detached busybox
# (in test file tests/integration/kill.bats, line 27)
# `[ "$status" -eq 0 ]' failed
....
# runc kill test_busybox KILL (status=0):
# runc kill -a test_busybox 0 (status=1):
# time="2023-04-04T18:24:27Z" level=error msg="lstat /sys/fs/cgroup/devices/system.slice/runc-test_busybox.scope: no such file or directory"
(cherry picked from commit fe278b9caa)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 343951a22b added a call to os.Stat for the device path
when generating systemd device properties, to avoid systemd warning for
non-existing devices. The idea was, since systemd uses stat(2) to look
up device properties for a given path, it will fail anyway. In addition,
this allowed to suppress a warning like this from systemd:
> Couldn't stat device /dev/char/10:200
NOTE that this was done because:
- systemd could not add the rule anyway;
- runs puts its own set of rules on top of what systemd does.
Apparently, the above change broke some setups, resulting in inability
to use e.g. /dev/null inside a container. My guess is this is because
in cgroup v2 we add a second eBPF program, which is not used if the
first one (added by systemd) returns "access denied".
Next, commit 3b9582895b fixed that by adding a call to os.Stat for
"/sys/"+path (meaning, if "/dev/char/10:200" does not exist, we retry
with "/sys/dev/char/10:200", and if it exists, proceed with adding a
device rule with the original (non-"/sys") path).
How that second fix ever worked was a mystery, because the path we gave
to systemd still doesn't exist.
Well, I think now I know.
Since systemd v240 (commit 74c48bf5a8005f20) device access rules
specified as /dev/{block|char}/MM:mm are no longer looked up on the
filesystem, instead, if possible, those are parsed from the string.
So, we need to do different things, depending on systemd version:
- for systemd >= v240, use the /dev/{char,block}/MM:mm as is, without
doing stat() -- since systemd doesn't do stat() either;
- for older version, check if the path exists, and skip passing it on
to systemd otherwise.
- the check for /sys/dev/{block,char}/MM:mm is not needed in either
case.
Pass the systemd version to the function that generates the rules, and
fix it accordingly.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit d7208f5910)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is just so that the container can join the misc controller.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 611bbacb3b)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Sometimes, the init process is not in the root cgroup.
This can be noted by GetInitPath, which already scrubs the path of `init.scope`.
This was encountered when trying to patch the Kubelet to handle systemd being in a separate cpuset
from root (to allow load balance disabling for containers). At present, there's no way to have libcontainer or runc
manage cgroups in a hierarchy outside of the one init is in (unless the path contains `init.scope`, which is limiting)
Signed-off-by: Peter Hunt <pehunt@redhat.com>
(cherry picked from commit 54e20217a8)
Runc parses cpuset range to bits in the case of cgroup v2 + systemd as cgroup driver.
The byte order representation differs from systemd expectation, which will set
different cpuset range in systemd transient unit if the length of parsed byte array exceeds one.
# cat config.json
...
"resources": {
...
"cpu": {
"cpus": "10-23"
}
},
...
# runc --systemd-cgroup run test
# cat /run/systemd/transient/runc-test.scope.d/50-AllowedCPUs.conf
# This is a drop-in unit file extension, created via "systemctl set-property"
# or an equivalent operation. Do not edit.
[Scope]
AllowedCPUs=0-7 10-15
The cpuset.cpus in cgroup will also be set to wrong value after reloading systemd manager configuration.
# systemctl daemon-reload
# cat /sys/fs/cgroup/system.slice/runc-test.scope/cpuset.cpus
0-7,10-15
Signed-off-by: seyeongkim <seyeong.kim@canonical.com>
Signed-off-by: Chengen, Du <chengen.du@canonical.com>
(cherry picked from commit 77cae9addc)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The purpose of this test is to check that there are no extra file
descriptors left open after repeated calls to runContainer. In fact,
the first call to runContainer leaves a few file descriptors opened,
and this is by design.
Previously, this test relied on two things:
1. some other tests were run before it (and thus all such opened-once
file descriptors are already opened);
2. explicitly excluding fd opened to /sys/fs/cgroup.
Now, if we run this test separately, it will fail (because of 1 above).
The same may happen if the tests are run in a random order.
To fix this, add a container run before collection the initial fd list,
so those fds that are opened once are included and won't be reported.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit f2e71b085d)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is to de-duplicate the code that checks that err is nil
and that the exit code is zero.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 7c75e84e22)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since Go 1.19, godoc recognizes lists, code blocks, headings etc. It
also reformats the sources making it more apparent that these features
are used.
Fix a few places where it misinterpreted the formatting (such as
indented vs unindented), and format the result using the gofumpt
from HEAD, which already incorporates gofmt 1.19 changes.
Some more fixes (and enhancements) might be required.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 45cc290f02)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
A new version of staticcheck (included into golangci-lint 1.46.2) gives
this new warning:
> libcontainer/factory_linux.go:230:59: SA9008: e refers to the result of a failed type assertion and is a zero value, not the value that was being type-asserted (staticcheck)
> err = fmt.Errorf("panic from initialization: %v, %s", e, debug.Stack())
> ^
> libcontainer/factory_linux.go:226:7: SA9008(related information): this is the variable being read (staticcheck)
> if e, ok := e.(error); ok {
> ^
Apparently, this is indeed a bug. Fix by using a different name for a
new variable, so we can access the old one under "else".
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 6662570110)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Function strings.Title is deprecated as of Go 1.18, because it does not
handle some corner cases good enough. In this case, though, it is
perfectly fine to use it since we have a single ASCII word as an
argument, and strings.Title won't be removed until at least Go 2.0.
Suppress the deprecation warning.
The alternative is to not capitalize the namespace string; this will break
restoring of a container checkpointed by earlier version of runc.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 7cec81e060)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. bump golang.org/x/sys to v0.6.0;
2. bump golang.org/x/net to v0.8.0
3. require Go 1.17.
Newer x/sys is needed to fix [1].
Go 1.17 is needed because x/sys/unix is using unsafe.Slice which
requires go1.17 or later.
This reuses parts of main commit a0f8847e2a.
[1] https://github.com/opencontainers/runc/issues/3715
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
centos-9 unit test sometimes fails with:
=== RUN TestPodSkipDevicesUpdate
systemd_test.go:114: container stderr not empty: basename: missing operand
Try 'basename --help' for more information.
--- FAIL: TestPodSkipDevicesUpdate (0.11s)
I'm not sure why the container output is an error in basename. It seems
likely that the bashrc in that distro is kind of broken. Let's just run
a sleep command and forget about bash.
Signed-off-by: Rodrigo Campos <rodrigoca@microsoft.com>
(cherry picked from commit 4d0a60ca7f)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
There is some kind of a race in CentOS 7 which sometimes result in one
of these tests failing like this:
systemd_test.go:136: mkdir /sys/fs/cgroup/hugetlb/system.slice/system-runc_test_pods.slice: no such file or directory
or
systemd_test.go:187: open /sys/fs/cgroup/cpuset/system.slice/system-runc_test_pods.slice/cpuset.mems: no such file or directory
As this is only happening on CentOS 7, let's skip this test on this
platform.
[This is a manual cherry-pick of main commit a7a836effa691edb6e.]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As this is currently not possible to add a PID into an existing systemd
unit, plus this feature will be deprected in runc 1.2 (see commit
d08bc0c1b3 ("runc run: warn on non-empty cgroup"), let's reject
sharing a systemd unit between two containers, and fix the test case
accordingly.
We still allow this to happen in case cgroupfs driver is used, to
minimize the potential compatibility issues in a stable branch.
This is an adaptation of main branch commit 82bc89cd10 for 1.1.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case a systemd unit fails (for example, timed out or OOM-killed),
systemd keeps the unit. This prevents starting a new container with
the same systemd unit name.
The fix is to call reset-failed in case UnitExists error is returned,
and retry once.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 1d18743f9e)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit d223e2adae ("Ignore error when starting transient unit
that already exists" modified the code handling errors from startUnit
to ignore UnitExists error.
Apparently it was done so that kubelet can create the same pod slice
over and over without hitting an error (see [1]).
While it works for a pod slice to ensure it exists, it is a gross bug
to ignore UnitExists when creating a container. In this case, the
container init PID won't be added to the systemd unit (and to the
required cgroup), and as a result the container will successfully
run in a current user cgroup, without any cgroup limits applied.
So, fix the code to only ignore UnitExists if we're not adding a process
to the systemd unit. This way, kubelet will keep working as is, but
runc will refuse to create containers which are not placed into a
requested cgroup.
[1] https://github.com/opencontainers/runc/pull/1124
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit c253342061)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Older kernels may return EINVAL on unshare when a process is reading
runc's /proc/$PID/status or /proc/$PID/maps. This was fixed by kernel
commit 12c641ab8270f ("unshare: Unsharing a thread does not require
unsharing a vm") in Linux v4.3.
For CentOS 7, the fix was backported to CentOS 7.7 (kernel 3.10.0-1062).
To work around this kernel bug, let's retry on EINVAL a few times.
Reported-by: zzyyzte <zhang.yu58@zte.com.cn>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit cecb039d24)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit 3291d66b98 introduced a check for /proc and /sys, making sure
the destination (dest) is a directory (and not e.g. a symlink).
Later, a hunk from commit 0ca91f44f switched from using filepath.Join
to SecureJoin for dest. As SecureJoin follows and resolves symlinks,
the check whether dest is a symlink no longer works.
To fix, do the check without/before using SecureJoin.
Add integration tests to make sure we won't regress.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 0d72adf96d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was found that rootless runc makes `/sys/fs/cgroup` writable in following conditons:
1. when runc is executed inside the user namespace, and the config.json does not specify the cgroup namespace to be unshared
(e.g.., `(docker|podman|nerdctl) run --cgroupns=host`, with Rootless Docker/Podman/nerdctl)
2. or, when runc is executed outside the user namespace, and `/sys` is mounted with `rbind, ro`
(e.g., `runc spec --rootless`; this condition is very rare)
A container may gain the write access to user-owned cgroup hierarchy `/sys/fs/cgroup/user.slice/...` on the host.
Other users's cgroup hierarchies are not affected.
To fix the issue, this commit does:
1. Remount `/sys/fs/cgroup` to apply `MS_RDONLY` when it is being bind-mounted
2. Mask `/sys/fs/cgroup` when the bind source is unavailable
Fix CVE-2023-25809 (GHSA-m8cg-xc2p-r3fc)
Co-authored-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit df4eae457b)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
First, check if strdup() fails and error out.
While we are there, the else case was missing brackets, as we only need
to check ret in the else case. Fix that too
Signed-off-by: Rodrigo Campos <rodrigoca@microsoft.com>
(cherry picked from commit 5ce511d6a6)
In 18c4760a (libct: fixStdioPermissions: skip chown if not needed)
the check whether the STDIO file descriptors point to /dev/null was
removed which can cause /dev/null to change ownership e.g. when using
docker exec on a running container:
$ ls -l /dev/null
crw-rw-rw- 1 root root 1, 3 Aug 1 14:12 /dev/null
$ docker exec -u test 0ad6d3064e9d ls
$ ls -l /dev/null
crw-rw-rw- 1 test root 1, 3 Aug 1 14:12 /dev/null
Signed-off-by: Jaroslav Jindrak <dzejrou@gmail.com>
(cherry picked from commit 7e5e017dba)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Cory Snider