runc/tests/integration/checkpoint.bats

#!/usr/bin/env bats

load helpers

function setup() {
  # XXX: currently criu require root containers.
  requires criu root

  teardown_busybox
  setup_busybox
}

function teardown() {
  teardown_busybox
  local pid fd

  for pid in "${PIDS_TO_KILL[@]}"; do
    kill -9 "$pid" || true
  done
  PIDS_TO_KILL=()

  for fd in "${FDS_TO_CLOSE[@]}"; do
    exec {fd}>&-
  done
  FDS_TO_CLOSE=()
}

function setup_pipes() {
	# The changes to 'terminal' are needed for running in detached mode
	# shellcheck disable=SC2016
	update_config 	' (.. | select(.terminal? != null)) .terminal |= false
			| (.. | select(.[]? == "sh")) += ["-c", "for i in `seq 10`; do read xxx || continue; echo ponG $xxx; done"]'

	# Create two sets of pipes
	# for stdout/stderr
	exec {pipe}<> <(:)
	exec {out_r}</proc/self/fd/$pipe
	exec {out_w}>/proc/self/fd/$pipe
	exec {pipe}>&-
	# ... and stdin
	exec {pipe}<> <(:)
	exec {in_r}</proc/self/fd/$pipe
	exec {in_w}>/proc/self/fd/$pipe
	exec {pipe}>&-
	# shellcheck disable=SC2206
	FDS_TO_CLOSE=($in_r $in_w $out_r $out_w)
}

function check_pipes() {
	echo Ping >&${in_w}
	exec {in_w}>&-
	exec {out_w}>&-
	run cat <&${out_r}
	[ "$status" -eq 0 ]
	[[ "${output}" == *"ponG Ping"* ]]
}

function simple_cr() {
  runc run -d --console-socket "$CONSOLE_SOCKET" test_busybox
  [ "$status" -eq 0 ]

  testcontainer test_busybox running

  for _ in $(seq 2); do
    # checkpoint the running container
    runc --criu "$CRIU" checkpoint --work-path ./work-dir test_busybox
    grep -B 5 Error ./work-dir/dump.log || true
    [ "$status" -eq 0 ]

    # after checkpoint busybox is no longer running
    testcontainer test_busybox checkpointed

    # restore from checkpoint
    runc --criu "$CRIU" restore -d --work-path ./work-dir --console-socket "$CONSOLE_SOCKET" test_busybox
    grep -B 5 Error ./work-dir/restore.log || true
    [ "$status" -eq 0 ]

    # busybox should be back up and running
    testcontainer test_busybox running
  done
}

@test "checkpoint and restore " {
	simple_cr
}

@test "checkpoint and restore (cgroupns)" {
  # cgroupv2 already enables cgroupns so this case was tested above already
  requires cgroups_v1 cgroupns

  # enable CGROUPNS
  update_config '.linux.namespaces += [{"type": "cgroup"}]'

  simple_cr
}

@test "checkpoint --pre-dump and restore" {
  setup_pipes

  # run busybox
  __runc run -d test_busybox <&${in_r} >&${out_w} 2>&${out_w}

  testcontainer test_busybox running

  #test checkpoint pre-dump
  mkdir parent-dir
  runc --criu "$CRIU" checkpoint --pre-dump --image-path ./parent-dir test_busybox
  [ "$status" -eq 0 ]

  # busybox should still be running
  testcontainer test_busybox running

  # checkpoint the running container
  mkdir image-dir
  mkdir work-dir
  runc --criu "$CRIU" checkpoint --parent-path ./parent-dir --work-path ./work-dir --image-path ./image-dir test_busybox
  grep -B 5 Error ./work-dir/dump.log || true
  [ "$status" -eq 0 ]

  # after checkpoint busybox is no longer running
  testcontainer test_busybox checkpointed

  # restore from checkpoint
  ret=0
  __runc --criu "$CRIU" restore -d --work-path ./work-dir --image-path ./image-dir test_busybox <&${in_r} >&${out_w} 2>&${out_w} || ret=$?
  grep -B 5 Error ./work-dir/restore.log || true
  [ $ret -eq 0 ]

  # busybox should be back up and running
  testcontainer test_busybox running

  runc exec --cwd /bin test_busybox echo ok
  [ "$status" -eq 0 ]
  [[ ${output} == "ok" ]]

  check_pipes
}

@test "checkpoint --lazy-pages and restore" {
  # check if lazy-pages is supported
  run "${CRIU}" check --feature uffd-noncoop
  if [ "$status" -eq 1 ]; then
    skip "this criu does not support lazy migration"
  fi

  setup_pipes

  # TCP port for lazy migration
  port=27277

  # run busybox
  __runc run -d test_busybox <&${in_r} >&${out_w} 2>&${out_w}

  testcontainer test_busybox running

  # checkpoint the running container
  mkdir image-dir
  mkdir work-dir

  # For lazy migration we need to know when CRIU is ready to serve
  # the memory pages via TCP.
  exec {pipe}<> <(:)
  # shellcheck disable=SC2094
  exec {lazy_r}</proc/self/fd/$pipe {lazy_w}>/proc/self/fd/$pipe
  exec {pipe}>&-
  # shellcheck disable=SC2206
  FDS_TO_CLOSE+=($lazy_r $lazy_w)

  __runc --criu "$CRIU" checkpoint --lazy-pages --page-server 0.0.0.0:${port} --status-fd ${lazy_w} --work-path ./work-dir --image-path ./image-dir test_busybox &
  cpt_pid=$!
  # shellcheck disable=SC2206
  PIDS_TO_KILL=($cpt_pid)

  # wait for lazy page server to be ready
  out=$(timeout 2 dd if=/proc/self/fd/${lazy_r} bs=1 count=1 2>/dev/null | od)
  exec {lazy_w}>&-
  # shellcheck disable=SC2116,SC2086
  out=$(echo $out) # rm newlines
  # show errors if there are any before we fail
  grep -B5 Error ./work-dir/dump.log || true
  # expecting \0 which od prints as
  [ "$out" = "0000000 000000 0000001" ]

  # Check if inventory.img was written
  [ -e image-dir/inventory.img ]

  # Start CRIU in lazy-daemon mode
  ${CRIU} lazy-pages --page-server --address 127.0.0.1 --port ${port} -D image-dir &
  lp_pid=$!
  # shellcheck disable=SC2206
  PIDS_TO_KILL+=($lp_pid)

  # Restore lazily from checkpoint.
  # The restored container needs a different name as the checkpointed
  # container is not yet destroyed. It is only destroyed at that point
  # in time when the last page is lazily transferred to the destination.
  # Killing the CRIU on the checkpoint side will let the container
  # continue to run if the migration failed at some point.
  ret=0
  __runc --criu "$CRIU" restore -d --work-path ./image-dir --image-path ./image-dir --lazy-pages test_busybox_restore <&${in_r} >&${out_w} 2>&${out_w} || ret=$?
  grep -B 5 Error ./work-dir/restore.log || true
  [ $ret -eq 0 ]

  # busybox should be back up and running
  testcontainer test_busybox_restore running

  runc exec --cwd /bin test_busybox_restore echo ok
  [ "$status" -eq 0 ]
  [[ ${output} == "ok" ]]

  wait $cpt_pid

  wait $lp_pid
  PIDS_TO_KILL=()

  check_pipes
}

@test "checkpoint and restore in external network namespace" {
  # check if external_net_ns is supported; only with criu 3.10++
  run "${CRIU}" check --feature external_net_ns
  if [ "$status" -eq 1 ]; then
    # this criu does not support external_net_ns; skip the test
    skip "this criu does not support external network namespaces"
  fi

  # create a temporary name for the test network namespace
  tmp=$(mktemp)
  rm -f "$tmp"
  ns_name=$(basename "$tmp")
  # create network namespace
  ip netns add "$ns_name"
  ns_path=$(ip netns add "$ns_name" 2>&1 | sed -e 's/.*"\(.*\)".*/\1/')
  # shellcheck disable=SC2012
  ns_inode=$(ls -iL "$ns_path" | awk '{ print $1 }')

  # tell runc which network namespace to use
  update_config '(.. | select(.type? == "network")) .path |= "'"$ns_path"'"'

  runc run -d --console-socket "$CONSOLE_SOCKET" test_busybox
  [ "$status" -eq 0 ]

  testcontainer test_busybox running

  for _ in $(seq 2); do
    # checkpoint the running container; this automatically tells CRIU to
    # handle the network namespace defined in config.json as an external
    runc --criu "$CRIU" checkpoint --work-path ./work-dir test_busybox
    grep -B 5 Error ./work-dir/dump.log || true
    [ "$status" -eq 0 ]

    # after checkpoint busybox is no longer running
    testcontainer test_busybox checkpointed

    # restore from checkpoint; this should restore the container into the existing network namespace
    runc --criu "$CRIU" restore -d --work-path ./work-dir --console-socket "$CONSOLE_SOCKET" test_busybox
    grep -B 5 Error ./work-dir/restore.log || true
    [ "$status" -eq 0 ]

    # busybox should be back up and running
    testcontainer test_busybox running

    # container should be running in same network namespace as before
    pid=$(__runc state test_busybox | jq '.pid')
    ns_inode_new=$(readlink /proc/"$pid"/ns/net | sed -e 's/.*\[\(.*\)\]/\1/')
    echo "old network namespace inode $ns_inode"
    echo "new network namespace inode $ns_inode_new"
    [ "$ns_inode" -eq "$ns_inode_new" ]
  done
  ip netns del "$ns_name"
}

@test "checkpoint and restore with container specific CRIU config" {
  tmp=$(mktemp /tmp/runc-criu-XXXXXX.conf)
  # This is the file we write to /etc/criu/default.conf
  tmplog1=$(mktemp /tmp/runc-criu-log-XXXXXX.log)
  unlink "$tmplog1"
  tmplog1=$(basename "$tmplog1")
  # That is the actual configuration file to be used
  tmplog2=$(mktemp /tmp/runc-criu-log-XXXXXX.log)
  unlink "$tmplog2"
  tmplog2=$(basename "$tmplog2")
  # This adds the annotation 'org.criu.config' to set a container
  # specific CRIU config file.
  update_config '.annotations += {"org.criu.config": "'"$tmp"'"}'

  # Tell CRIU to use another configuration file
  mkdir -p /etc/criu
  echo "log-file=$tmplog1" > /etc/criu/default.conf
  # Make sure the RPC defined configuration file overwrites the previous
  echo "log-file=$tmplog2" > "$tmp"

  runc run -d --console-socket "$CONSOLE_SOCKET" test_busybox
  [ "$status" -eq 0 ]

  testcontainer test_busybox running

  # checkpoint the running container
  runc --criu "$CRIU" checkpoint --work-path ./work-dir test_busybox
  grep -B 5 Error ./work-dir/dump.log || true
  [ "$status" -eq 0 ]
  ! test -f ./work-dir/"$tmplog1"
  test -f ./work-dir/"$tmplog2"

  # after checkpoint busybox is no longer running
  testcontainer test_busybox checkpointed

  test -f ./work-dir/"$tmplog2" && unlink ./work-dir/"$tmplog2"
  # restore from checkpoint
  runc --criu "$CRIU" restore -d --work-path ./work-dir --console-socket "$CONSOLE_SOCKET" test_busybox
  grep -B 5 Error ./work-dir/restore.log || true
  [ "$status" -eq 0 ]
  ! test -f ./work-dir/"$tmplog1"
  test -f ./work-dir/"$tmplog2"

  # busybox should be back up and running
  testcontainer test_busybox running
  unlink "$tmp"
  test -f ./work-dir/"$tmplog2" && unlink ./work-dir/"$tmplog2"
}