We need these to match the Makefile detection of the right gcc for
runc-dmz, as well as making sure that everything builds properly for our
cross-i386 tests. While we're at it, add x86 to the list of build
targets for release builds (presumably nobody will use it, but since we
do test builds of this anyway it probably won't hurt).
In addition, clean up the handling of the native architecture build by
treating it the same as any other build (ensuring that building runc
from a different platform will work the same way regardless of the
native architecture). In practice, the build works the same way as
before.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
The runtime spec now allows relative mount dst paths, so remove the
comment saying we will switch this to an error later and change the
error messages to reflect that.
Signed-off-by: Rodrigo Campos <rodrigoca@microsoft.com>
From the Go specification:
"1. For a nil slice, the number of iterations is 0." [1]
Therefore, an additional nil check for before the loop is unnecessary.
[1]: https://go.dev/ref/spec#For_range
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Burstable CFS controller is introduced in Linux 5.14. This helps with
parallel workloads that might be bursty. They can get throttled even
when their average utilization is under quota. And they may be latency
sensitive at the same time so that throttling them is undesired.
This feature borrows time now against the future underrun, at the cost
of increased interference against the other system users, by introducing
cfs_burst_us into CFS bandwidth control to enact the cap on unused
bandwidth accumulation, which will then used additionally for burst.
The patch adds the support/control for CFS bandwidth burst.
runtime-spec: https://github.com/opencontainers/runtime-spec/pull/1120
Co-authored-by: Akihiro Suda <suda.kyoto@gmail.com>
Co-authored-by: Nadeshiko Manju <me@manjusaka.me>
Signed-off-by: Kailun Qin <kailun.qin@intel.com>
This makes libcontainer/userns self-dependent, largely returning to
the original implementation from lxc. The `uiMapInUserNS` is kept as
a separate function for unit-testing and fuzzing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the container does not have own mount namespace configured (i.e. it
shares the mount namespace with the host), its "prestart" (obsoleted)
and "createRuntime" hooks are called twice, and its cgroups and Intel
RDT settings are also applied twice.
The code being removed was originally added by commit 2f2764984 ("Move
pre-start hooks after container mounts", Feb 17 2016). At that time,
the syncParentHooks() was called from setupRootfs(), which was only
used when the container config has mount namespace (NEWNS) enabled.
Later, commit 244c9fc426 ("*: console rewrite", Jun 4 2016) spli
the relevant part of setupRootfs() into prepareRootfs(). It was still
called conditionally (only if mount namespace was enabled).
Finally, commit 91ca331474 ("chroot when no mount namespaces is
provided", Jan 25 2018) removed the above condition, meaning
prepareRootfs(), and thus syncParentHooks(), is now called for any
container.
Meaning, the special case for when mount namespace is not enabled is no
longer needed.
Remove it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This file contains a test that tests .so hooks. It has a complicated
setup and teardown, and has special requirements (root and no_systemd).
Rename it to hooks_so.bats, so we can add hooks.bats for hooks tests
that do not have such complicated setup and requirements.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When a hook has failed, the error message looks like this:
> error running hook: error running hook #1: exit status 1, stdout: ...
The two problems here are:
1. it is impossible to know what kind of hook it was;
2. "error running hook" stuttering;
Change that to
> error running createContainer hook #1: exit status 1, stdout: ...
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
golangci-lint v1.54.2 comes with errorlint v1.4.4, which contains
the fix [1] whitelisting all errno comparisons for errors coming from
x/sys/unix.
Thus, these annotations are no longer necessary. Hooray!
[1] https://github.com/polyfloyd/go-errorlint/pull/47
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Usually errorlint allows io.EOF comparison (based on a whitelist of
functions that can return bare io.EOF), thus there is no need for nolint
annotation.
In this very case, though, the need for nolint is caused by issue with
errorlint, which fails to see where err is coming from.
Refer to the issue so when it is fixed we can remove the annotation.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The default timeout is 360 minutes, which is way long for these jobs.
If the CI (or a test) has stuck, we'd better know about it earlier than
in 6 hours.
Set the timeouts for some [relatively] long running jobs conservatively:
- test and release jobs usually take ~10 minutes;
- lint job takes 1 minute (but can be a few times slower when we switch
Go or golangci-lint version);
- cross-386 job takes about 2 minutes;
- the rest is seconds (and I am lazy to set timeouts everywhere).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In the runc state JSON we always use snake_case. This is a no-op change,
but it will cause any existing container state files to be incorrectly
parsed. Luckily, commit fbf183c6f8 ("Add uid and gid mappings to
mounts") has never been in a runc release so we can change this before a
1.2.z release.
Fixes: fbf183c6f8 ("Add uid and gid mappings to mounts")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
The original implementation of cgroupns had additional synchronisation
to "ensure" that the process is in the correct cgroup before unsharing
the cgroupns. This behaviour was actually never necessary, and after
commit 5110bd2fc0 ("nsenter: remove cgroupns sync mechanism") there is
no synchronisation at all, meaning that CLONE_NEWCGROUP should not get
any special treatment.
Fixes: 5110bd2fc0 ("nsenter: remove cgroupns sync mechanism")
Fixes: df3fa115f9 ("Add support for cgroup namespace")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
The kernel ignores these arguments, and passing them can lead to
confusing error messages (the old source is irrelevant for MS_REMOUNT),
as well as causing issues for a future patch where we switch to
move_mount(2).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
*os.File is correctly tracked by the garbage collector, and there's no
need to use raw file descriptors for this code.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
This includes quite a few cleanups and improvements to the way we do
synchronisation. The core behaviour is unchanged, but switching to
embedding json.RawMessage into the synchronisation structure will allow
us to do more complicated synchronisation operations in future patches.
The file descriptor passing through the synchronisation system feature
will be used as part of the idmapped-mount and bind-mount-source
features when switching that code to use the new mount API outside of
nsexec.c.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The code in this function became quite complicated and not entirely
correct over time. As a result, if an error is returned from parseSync,
it might end up stuck waiting for the child to finish.
1. Let's not wait() for the child twice. We already do it in the
defer statement (call p.terminate()) when we are returning an error.
2. Remove sentResume and sentRun since we do not want to check if
these were sent or not. Instead, introduce and check seenProcReady, as
procReady is always expected from runc init.
3. Eliminate the possibility to wrap nil as an error.
4. Make sure we always call shutdown on the sync socket, and do not let
shutdown error shadow the ierr.
This fixes the issue of stuck `runc runc` with the optimization patch
(sending procSeccompDone earlier) applied.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Aleksa Sarai